Your unique mod on the 1st Gens

Ok I saw this over in the 2nd gen forum but I like the idea and would like to see everyones creative/unique ideas. Post em up and tell us what you have done.

 

I have the only 1st gen. in this ENTIRE forum of ...what is it ? 45000 members plus ? That has 1st gen. Tundra adjustable 5100's on their truck !! & what makes these unique is that there are 5 settings on these instead of 3 like 99% of everyone else's





Also fabbed & installed a sheet of steel mesh to protect the exposed area of the radiator after trimming 90 % of my front bumper off ...

 

I have 2nd gen wheels with the FJ Center cap mod on my 1st gen. Only one I know of.

 

I have a zip tie holding my bumper trim onto the rear bumper

 

Those are great looking wheels - did you have to install a spacer? I was under the impression that they had too much backspace to fit by default.

-Sam

 

lmao good one

 

Dude, that zip tie MOD is soooo old, you need to upgrade to the chicken wire bumper MOD like I did (sheeesh, don't people ever upgrade ? )j/k

 

NICE !!! See people this is what I'm talking about, get outside that box of "normal" thinking & just start acting on those crazy ideas rolling around in your mellon , who knows what you'll come up with !! Those 2nd gen rims w/FJ center caps looks tight man, I really like it !!

 

Post a walkthrough and I'm all over it

 

What for??

 

Is that tied into the head unit?

 

now thats pretty cool

 

No spacers needed as long as you stick to 265/70/16 tires.

 

^ which is why you're in a class of your own

 

5 prong trailer plug for the jet ski trailer. Might even install a brake controller later since the trailer has brakes.

 

I have amber LEDs in the lower valence behind a billet insert. This is a really crappy pic but it's all I have until it gets a little darker outside.

 

After making my outlets work all the time by removing the relay and adding the Jumper. I still wanted to be able to switch my outlets on and off.
I grabbed a Hazard switch from the Junkyard, then i mounted it in a switch hole down next to the outlets. I took off the triangle logo, and marked it to say 12v. It breaks the ground to the outlets, turning them off when not in use.

Or maybe my foglight wiring?

 

i have a wad of paper between the winshield and dash on the passenger side to stop it from rattling. (kinda works)

 

Nice! I've been meaning to install a power inverter with USB power under the seat & remote mount the AC outlets & USB ports to the dash somewhere.

I would just want it for power, mainly to charge stuff.

Cool, I've seen that done on 2nd gens. Good idea. I have that same 5 prong plug but it's just mounted on my bumper. Not by choice though, I got it like that, I wasn't too happy about it but I wasn't going to let that stop me from buying this one.

The only pic I have showing it.