1st Gen Lunchtable Thread - General Discussion

I forgot I changed my password until I entered the old one 2x and got locked out

 

I don't trust those bastids after all that stuff in the news about them getting caught scamming people by setting up unauthorized credit cards and what not

My auto loan was through them though but luckily I'm nearly done with that

 

Triumph TR7

 

Rolling Stones woo hoo

 

Eventually

 

Still chasing the speed sensor gear oil leak. It got worse and was covering my rear axle in oil on the highway. I re-sealed the speed sensor housing (traced in pink) that bolts off the rear and did the flange seal and output shaft seal just in case. The orange dot is where the leak collects. The whole area around that speed sensor port is always soaked but it's not coming from where the case splits or the top of the case. I just ruled out the output shaft seal and that housing. So I guess it has to be the chinese aftermarket speed sensor like I thought.

Might have to see if anyone can sell me an OEM sensor off a damaged case. My damaged case off the flatbed had a non-functional sensor attached.

 

I wanna do On Board air

 

Buy a compressor

 

I’m gonna get the Smitty built one and I was thinking about putting the tap on the front bumper, and making one of those four way tire inflator‘s then have a valve and gauge inside the truck

 

Waaay overlander points bro

 

My home loan is with them. I'll get refinanced with my credit union at some point. My credit is 200 points better than when I started the loan.

 

Set up my work 401k since they started the program last month...I need to sit down with someone that knows this shit. Setting up a percentage of each check to contribute was simple but deciding on which investments to put it in is like reading Chinese to me.

 

Got the yota from the tint shop today. 32% on the roll ups and 5% everything else.

 

That's how that's done without others around

 

Looking good, hopefully you can see out of those at night!

 

That's creative. Wouldn't expect any less from you

 

Could just loosen the clamps then drive reeeeeeaaaaalll fast in reverse then slam on the brakes.

 

Depending how you set it up that might be a good way (meaning bad) to get shit in your coupler and air line. Just a thought.

 

He might get splatter a bug on the highway

 

Not one of my favorite things to use it for, but oh well it came off un-damaged.