HELP Supercharger Install 1995.5 Tacoma

Ya no cell lights at all, truck runs perfect right now at 160k

 

http://www.car-part.com/mobile/index.htm

 

@1997tacomav6 for the low fluid sensor did you just add your own aftermarket and wire the led in the pillar mount? (do you know what aftermarket sensor you got?) Also for the light you have for when the pump is spraying im assuming thats just wired directly to the pump and when it turns on the light turns on? Sorry for the dumb questions! Also thanks for recommending the high speed lab they have been great to work with to get rotors recoated!

 

The low level sensor I ended up finding a used wiper tank that actually had a stock Toyota low level sensor already part of the tank and it wired right up. It would be easier this route.

I had a company install the pillar light and that system.

Glad wade is taking care of you

 

still looking for that ECU, most of the places on car-part.com dont have one if you call even though its listed... and toyo pros in Colorado will pick up the phone and state they will check their inventory and call you right back and never do... tried calling 5 times with same response... very disappointed

 

Try Craigslists there are plenty of wrecked v6 Tacoma trucks out there with them or here in the parts department

 

@riven29 Any updates on your project? I’m also trying to supercharge my ‘95.

 

I have a 97 reg cab auto I have an extra ecm. I didnt know you could just plug and play a 98 ecm to a earlier model taco, or am I wrong? Cus I sure would love to get a better ecm where the idle wasnt too low like a 98 or 99 ecm