Eibach pro lift kit

Absolutely.

 

Great, thanks. I will probably install the rear AAL's first and go for drive, then measure before I decide which setting to go with.

 

I like the ride with my 5100's and Eibachs, I used a deavers aal. Went bottom clip and got about 2" all around.

 

Just a few questions about the front assembly. I snapped a few pictures for reference.

Should I remove the bushing out of the new kyb mount and use the eibach one?

And snap ring adjustment... should I buy some snap ring pliers? Or just a flat head screwdriver to get it over the lip and push it up?

 

Not sure about the bushing but if you want to move the snap ring just use a pair of pliers. Move one of the opening ends up and then the other. Move the back middle of the clip up if needed.

 

Will not work

 

stock fronts are interchangeable w mod to bushings or just swap them. stock t4r rear shocks are shorter. im sure you could make them fit but would you want to or worth the hassle

 

Shock assembly went down today, pretty straight forward process, set at the middle clip. Can anyone chime in on the top bushing compression..... looks super squished... I'm assuming once the weight of the truck is applied that top bushing will settle down. Also does anyone know the torque for the center nut... or can see how many threats are showing above the nut.

 

I tightened mine down that much, possibly another thread or two.

 

Did the bushing decompress a bit now that it's on the truck?

 

Just finished installing my Eibach pro springs on Bilstein 5100s, used the 2nd clip to get about 2.5" of lift up front. Paired with 5100s in the rear and a wulf AAL for 2" in the rear.

Love the look. Almost level, with a little rake.

 

Does anyone have tall skinny tires with this eibach pro lift kit. I have the 255/85/16 Cooper's on mine and I am wondering what the actual total height is from ground to top xm antenna. Mine so far is at 64". I ask this because almost all the car washes and parking ramps around here are 70" max height and I would like to not go over that if possible. I do not have this kit yet but that will be the yay or nay factor. Thanks for any help.

Stock 19 off road double cab long bed with Cooper's on.

 

Thanks, I was worried the 5100s at the 2nd clip would be to high in the front but glad I went with it. Now just need some decent tires. I should just steal the 285s on TRD 17" wheels from my wife's 4runner!



Hey Ryan, do you guys have 4runner front springs that I can throw on Bilstein 5100s? Our 4runner is on 5100s at the top clip with factory springs and the ride quality leaves a little to be desired. Definitely want to replace those soon.

edit: Looks like E30-82-071-01-20 with 5100s at lowest setting will fit the bill? (Already have Icon 2" springs in the back.

https://eibach.com/us/i-7888-pro-lift-kit-springs-front-springs-only.html

 

That spring will get you about 2.75" of lift (from factory height) at the bottom clip. You could probably run the second clip if you have a 2" rear.

 

Did you take a hub to fender measurement on the front post install?

 

Thanks, definitely going to be picking up a set of those springs in the near future.

No I meant to but I forgot. I did measure from floor to fender but I forgot what it was haha. Oh well.

 

Always in stock

 

That new new...

 

Price and availability?

 

You're such a tease..... I like it