265/70/18 on limited 2018

Hi, Just wonder if anybody run 265/70/18 on 3rd gen limited stock rim. I have a 2" lift and wonder about the rubbing. Thanks

 

265/65r18 should fit no rubbing, not sure on 265/70r18

 

That’s damn close to stock size isn’t it?

 

Its 2 sizes up I think.

 

265/65/18 Stock hight. You should be fine with a 2 inch lift

 

Should be fine. I run 275/65/18 and a ~2 inch lift. It looks like i would have plenty of room to go a size larger to 70/18 where I run into issues is with the width. To not bump the UCA's with my 275's I have spacers

 

Really like the sport with the limited wheel

 

So you are saying I should be fine with 265/70/18 ?

 

What kind of wheel spacer you use to push the whole wheel and tire out? Looks great

 

What brand of tire you use, how does that affect your MPG? Thanks

 

No spacers. The tires are Nitto Ridge grapplers and yea, you should be fine with 265/70/18. The tires are SL load so I saw a minimal loss of MPG

 

quick edit, I have 32's and fit fine with the lift you have but what you're looking at is almost at 33. lots of guys have 265/75/17, i would get their opinion. Some people have to do CMC when the get 33" and above I think

 

I just went with 255/70/18 a few weeks ago on my limited. Very happy with the outcome. I only did a leveling kit but have no rubbing at all.

 

Any pictures?

 

I'll take a few this weekend and post

 

265/70/17’s with ~1 1/2” level lift. 2016 limited. Dropped down 1” wheel size, minor rubbing. Nothing to bad. Gotta trim stock flaps.

 

ok here's a few pics. Tires are the Continental TerrainContact AT, 255/70R18 SL. Still haven't had any rubbing. I've only leveled with Bilstein 5100s, 1st clip. 1/4" spacer on driver's side.
Really like these tires. They're pretty light, and interestingly have the same tread width as OEM despite being 255s and don't really look skinny to my eyes.

 

Truck looks nice. I have a 2020 limited and want to look at putting 265 70 18 on mine to make it a bit taller. I do not have a lift kit. Based upon your experience do you think I will have any issues?

 

2017 Limited 4x4, 5100's(set on highest setting) on stock springs with SPC UCA. (2" increase front lift and rides better than stock) On the back ICON 1.5" add a leaf pack. I'm currently sitting on Toyo AT2 275/65R18's and have zero rub and sits level. I'm going to move to 265/70's and still shouldn't rub I just don't want to do any cutting and like my OEM wheels. You will rub without increasing height.

 

What wheels you running?