What Have You Done To Your 3rd Gen Today?

I'm interested too. Any information you can provide would be much appreciated.

 

Worse than this?

 

This would be better.

 

You need to chop it and add a fart stick.

 

would 3M tape hold that to a diamondback HD? I’d spring for the brand name 3M stuff and not the Chinese version.

EDIT: I wouldn’t want to drill.

 

Nope! The only thing is my dash cam felt a little loose in the go pro adapter, so I just stuffed it a little with putty to make it snug. Sounds weird, but it worked.

I used a mount from Shapeways, I'll link it below. As far as the wiring, I just used a hardwire kit to turn off the camera below 11.5V, and it stays hot even when the truck is off.

Go pro adapter:
https://www.shapeways.com/product/P...unt-best-way?optionId=63619415&li=marketplace

Dash Cam (Rexing V1):

$50 Rexing V1 Basic Dash Cam 1080P FHD DVR Car Driving Recorder, 2.4" LCD Screen 170°Wide Angle, G-Sensor, WDR, Parking Monitor, Loop Recording

https://www.amazon.com/gp/product/B07RLTXMWS/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Wiring kit I used (one of many options):

Rexing Mini-USB Hardwire Kit for V1, V1P, V1 3rd Gen, M1, M2, M1 PRO Dashcams

https://www.amazon.com/gp/product/B01LXC2329/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1

Keep in mind that there are different rexing dash cams, and Shapeways has different mounts for them. Make sure you pair them up correctly.

 

Rola hitch cargo carrier

 

Appreciate the information!

 

Little something something $80 well spent compare to $200.... thanks to @steveo27 !!! Saving me money!!

went to tap plastic paid $40 for the starboard another $40 for service and boom!

 

I added sound deadening to the driver’s side door, wired up the DRL on my USR mirror turn signal and swapped the chrome for a black door handle. Got the passenger’s side door done a week or two ago. Now I need to do both rear doors. At this rate, I might be done with this project by the summer. Rear doors should take less time. 2 down, 2 to go!

 

Washed the truck today since the weather is nice. Plus I wanted to get some progress pictures before my suspension upgrade is installed and the windows are tinted.

 

Is that an Avid Offroad bumper guard? Are you happy with it, does it seem to be well built? It is one of the options I'm considering. I'm looking for something that had decent strength, and not just for looks. Thanks.

 

Lots of us on here with the Falken's! Not sure how that's even possible, I've read all over the forums that they never balance and they're the worst tires evah

 

Sure, but these go to 11... I mean it's orange

 

Yes!

 

is it a OEM cover or aftermarket?

 

@blam827 where did you get your grille and is the sensor garnish aftermarket too?

 

Custom Ladder what started as a GOBI ladder for T4R. On 35s Te37x, Kings, Dakar HDs, Nitro 5.29s, OVtune w/ Dump Tube

 

Very nice. Good Job!