What Have You Done To Your 3rd Gen Today?

Here you go!

 

LOL! I got slapped for a casual glance.
Now I notice when my shoes need polishing!

 

Installed a leveling kit and OEM 4Runner pro wheels on 285/75/17 Nitto Grapplers

Before


After

 

Hello. I just installed the Fire Flys kit a few minutes ago. I discovered the same thing that you did, which was the vanity lights are really freaking bright. I noticed that the LED lights are directional, unlike the OEM "fuse" style lights. So I tried turning them away to the sides, so they weren't facing straight forward, and that cut down the harshness quite a bit. They are still bright, but are now usable, and not blinding. If you really like the LED tempurature like I do, it's worth a try if you still have the LED bulbs somewhere.

 

Night vision map lights.

 

Added this coin sorter. Now if I can just find some spare change.

 

Swapped out my 2016-2019 TRD Pro tail lights for the 2020 ones. Before and after pics below. Only difference really is the black strip along the middle of the tail light on the 2020 ones, gives it a little bit of a new look.

 

Installed new Falken Wildpeaks A/T3W 265/65-17 tires.

 

Welcome to TW M8!

 

New shoes... KO2's 265/75/r16

 

Germes Lab RFCC TTG2 with Natika Front Camera
A/V Adapter PnP for the WiFi Display Module
Add-a-fuse

Works with all of the mirroring from most phone except Pixels.
I'll be swapping to a standard HDMI to A/V converter and adding a Chromecast for the mirroring. You want to buy my WiFi Display Module? Just doesn't work with my Pixel. Did the video with my friends iPhone.

 

Nice, did the same on my son’s Tundra in the 265/70/17 size

 

I found one on eBay for $20

 

Looks good.

 

Son’s truck KISS “Keep It Stock Stupid” is what we are going for on the Tundra

 

What product did you ask Tap for? I asked them for 1/2" and they quoted me $170. I am in NorCal though so maybe they just like to rip people off?

 

WTf it should be 1/4 hdpe should be $40, I'm also norcal too 45min north of SF

 

Installed OEM bed light kit and MESO’s headlight trim plates.

 

Must be because of the 1/2". I want to be able to cut in some cup holders and potentially an opening to the space behind it.

 

Any links to the products you got?