ICON RXT leafs and Superbumps U-bolt flip

So I just purchased the ICON RXT leaf pack with the Wheelers U-bolt flip kit with Superbumps. Getting ready to install now. Question is, on the RXT pack, option 1,2,or 3. I’m currently running ICON 2.5 VS EXT travel coilover up front with 700# springs. ICON AAL in the rear on stock springs, for a supposed 1.5” lift in the rear. I want to get about another 1-1.5” lift in the rear, and up front. I can raise the front a bit more, but ICON doesn’t recommend over 1.13” of visible threads with the 700’s. Is this fact? Have people pushed it further? And that setting in the rear leafs??

 

ICON’s suggestions

 

When I had my Icon 2.5 Ext Coilovers(1 3/4”threads showing above collar) with 700lb springs, RXT Shocks and RXT Leaf Pack(Option 1). I unfortunately do not have the initial measurement but these yielded me from center of center cap to bottom of fender with a full tank of gas shortly before removal:

DF: 23 3/8”
PF: 23 1/2”
DR: 23 3/4”
PR: 24 1/4”

The picture was taken a couple months after install

 

Wheeler’s Super Bumps and Flip Kit in there too, plus 2” extended brake lines

 

nice Taco! Super clean and the islands sticker on the fender looks sweet.

 

Thanks man!