3rd gen with larger tires and/or lifted on STOCK WHEELS

Rubber to come this Spring

 

Na I definitely needed spacers I just didn't include it in my original post. I have 1.25" spidertrax to clear the UCAs.

 

Beast

 

Here is another one, I couldn't get it to upload before.

 

Gotcha, not crazy about running spacers but looks like i might have to. Any vibrations with the spidertrax?

 

Na I’ve had 0 issues with my truck pretty much overall. I’ve got a slight vibe (probably more related to the lift than anything else) between 25-27 mph but it’s so small only the owner of the truck would notice it. When I retorqued the spacers they didn’t budge at all so if you just follow the instructions for install then I’m sure you’ll have no problems.

 

Cool deal, I noticed in your build you got yours from capitol capitol Toyota in Salem. That's where I will be getting my Tacoma serviced while still within Toyota Care. Did they give you any grief for the spacers?

Thanks.

 

I haven’t used them for routine service but they seem pretty cool. They do spacer lifts and whatnot so I figure they won’t care if you have wheel spacers. I’ve only had my truck serviced in Eugene but wish I could go to Capitol because the Eugene dealers are horrible. Asked them to rotate my tires at the first service and they bold face lied that they did. I had to show them the marks I made on the inside on my tires before they started apologizing. Capitol is a much better dealer.

 

Here is my 17'.
3" front spacer, 2" rear block. 1.25" wheel spacers, 285/75/16 K02's.
No rubbing. At all. On or off road.

 

Looking good! Hoping to get some K02's installed at Costco in the next week or so. Just need to do my cab mount chop first and my spidertrax spacers should be showing up in the next day or so.

 

Thank you! What size are you going with?
I didn't have to do the cab mount chop.

 

285/75/16. I may not need the chop but I got the plates and a welder so I figured why not just to be on the safe side.

 

Have you been driving around for the last 3 years without a front bumper?

 

Just be aware of Costco's 3% tire size policy...

https://www.tacomaworld.com/threads...factory-17”-sema-wheels-on-my-18trdor.615774/

 

My local Costco put 285s on sema Trd pro wheels for our 4runner last year no problem. If they give me any issue I'll just get them somewhere else. Just like the free tire warranty Costco provides with your membership.

 

I think it's local policy, but my Costco won't mount tires you didn't buy there (I have read some anecdotal evidence that some will, so I inquired on our last visit). Which worked out in my favor, I suppose, as I had to bring my Falken's to the shop across the road, who subsequently damaged one of my F5's, so now I'm getting a free fifth F5 and once they're done mounting it I probably won't go back there for anything else. If you can't mount my tires without breaking one, I'm not sure I can trust you with other jobs.

 

Nope.

 

Lol, these are old photos of when I had stock wheels (for this purpose of this thread).

Also, would I be in trouble if I did have no bumper still?