What Have You Done To Your 3rd Gen Today?

Did an overnighter at the beach this weekend to try out the (new to us) iKamper. Pup had a blast.

 

Came up with a nice little Mountain bike rack for on top of my tonneau cover.
I beefed up all the joints with steel brackets and added extra mounting points to the bed rails.

 

Please do! Encourage by good results on my grill, I've thought about trying the same thing.
In my mind it looks good . . . But I've not actually seen one done.

 

I ended up using some leftover "Z" brackets from an Aleko Gate Kit (similar to

RICH SOLAR Solar Panel Mounting Z Bracket Mount Supporting for RV, Roof, Boat, Set of 4 Units (Z Brackets B)

solar panel brackets) to mount the 10" Rigid Midnight below the Grille (purchased from TJ @Truck Brigade). This spot can only take a 10" bar if you have the SSO Slimline bumper with the

$559 SmittyBilt X2O-10K WATERPROOF SYN - SB98510

X-20 Smittybilt winch because the control box and clutch lever are in the way. I was able to utilize existing holes (red circles) in the cross brace by popping out the plastic bumper clips, overlaying the gate brackets onto the cross member, and installing thru bolts to hold the brackets in place. Please let me know if you have any questions. Cheers! P.S. I'll try to get some light output pictures soon!

 

Because meso mod?
The brake light also has an integrated NMO antenna mount so I didn’t have to put a separate hole in the roof.

 

How?? I only did my scoop and that turned out horrible

0/10 would not recommend my wrap job. Yours on the other hand

 

Thanks man. I like to have a little fun too no need to take it personal. I appreciate a good dodge joke now and again lol.

 

switched the camera for better viewing angle much better now.

 

Oh man. I’d run a bolt straight through And put a nut on both ends but holes are jot aligned.

 

Nice, that looks great!
One quick question: TSS works fine with the camera there? I am thinking of trying mine in that position.

 

Welcome to TW!

 

Nothing taken personally just my warped sense of humor kicking in.
No harm, no foul, just a little friendly razzing.

 

Made appointment to have my '20 Tacoma to have front end and tail gate wrapped with Xpel Ultimate Plus!

 

To Foster Imposter
I have TSS on my 2018 and had my front camera installed exactly as shown above. My radar would shut off once or twice a month. Always came back on.
Moved my camera just to the left of the sensor and it has not shut down since in 9 months.

 

Thanks. Does the picture on the screen look weird with the camera not centered?

 

Received my bed lights from Toyota yesterday in the mail. Very easy install and definitely makes a difference. Especially under the DB cover. Picture was taken in complete darkness. Need to get that tire mounted on the spare wheel today....

 

I can assure you it was NOT easy!

I had some help from a friend for extra hands to hold the heat gun and help stretch and apply pressure. Once you learn the tricks it goes pretty smooth but I do t recommend doing it alone. I did the first mirror but myself. Took almost 2 hours. The second mirror I had help and took 15min. I’m just really hope this hold up better than dip. Time will tell

 

He might be like me in that those stickers do not bother him.

 

Yes it works as intended no issues with TSS.