What Have You Done To Your 2nd Gen Tacoma Today?

the bent plate is from a water crossing. same thing happened on my buddies FJ

 

New frame done. New struts gave it a little altitude adjustment.
Gonna do Fluid Film today while it's still squeaky clean, & adjust the headlights.

 

Those look great! You should make and sell kits lol

 

Got my camper shell back window limo tinted... now I have zero visibility inside my vehicle from the back passenger windows all the way to the back of my truck

 

I took apart the connection for my driver side fog light cleaned it ,dielectric greased it and used a zip tie around the plug to hold it together tight . Friggen thing been giving me problems for years Also lubed up the Total Chaos UCAs .

 

I can just smell that facility.
Is that Waste management on Hwy 3?

 

Got rid of the last bit of chrome

 

It's Snohomish Co SW Transfer Station in Mountlake Terrace. Funny thing you say that as my 12 yr old, now old enough to help unload, was dreading the smell but after we got that she said it didn't smell that bad. I think COVID was keeping people at home, it was not crowded at all. In and out.

 

Wired up the switch panel and GMRS Midland. Very happy with how it turned out!

 

Chopped the exhaust and hanger to make room for the spare. Gave it a coat of high heat black paint and i must say, it cleaned up the rear quite a bit. 285 spare fits perfectly with plenty of clearance between the diff and leaf hangers.

 

Spring cleaning and going through my parts for the truck.

I'm also figuring out the wiring for my aftermarket fuse/relay box and the mounting for it.

 

created a new sig, testing it out now

test

 

Nice! I used to own a Henna 88 M3

 

Washed the truck for the first time since September

 

Finished Hi-Lift hangers:

 

Cleaned my MAF sensor and replaced the gasket along with the old bolts.

 

Baking apart a pair of Depo headlights for the retrofit. Mini D2S 5.0 going in there.

 

I personally would of use the oem housings and depo lens for the retrofit. My last last retrofit was done on a set of depos and the sheer weight of the D2S projectors snapped the entire bowl off the ball pivot. Poor quality. None the less, maybe you'll have better luck than i did. You're gonna love the output.

 

I haven’t heard of the D2S being a problem with the Depo housings. I used a set of Depo with Mini H1 on my last Taco, so I hope this works out.

 

This is how the 2nd gen Anti theft devise starts out, just sharing, that's all