Do these alignment numbers look ok?

Installed the JBA standard HC uppers and had a couple of questions on the alignment and at full lock to lock tires are almost touching UCA..Is this normal for the JBA's?

 

Very nice alignment numbers. I’m impressed.

 

Perfect alignment numbers. It’s your wheel/tire size causing them to be close to the UCA. Either get new wheels with a negative offset or run wheel spacers

 

Cool thanks... Wheels are stock sport 17" and tires are BFG KO2's 265/70/17.. While the wheels are straight there's plenty of room, but at full lock to right or left the tires are super close to the UCA's

 

Yeah they’re meant for use with aftermarket wheels with a lower backspacing. As long as you don’t rub on them you’ll be fine

 

Alignment looks good. On the JBA site, it tells you what tire and wheel combos work with the UCAs when you scroll down.

 

Off the JBA site.

 

265/70/17 tires are about the same size as 265/75/16 tires, not sure on the width of the factory sport 17" wheels tho

 

About 7 inches