What Have You Done To Your 2nd Gen Tacoma Today?

He did mine as well, not as colorful, he does great work

 

Wiring came in today for my electrical project.
500' of 20 ga.

I have a fuse/relay box that holds 6 fuses and relays, I think I'm going to need more so I may buy another one and re-figure out the mounting for both boxes instead of one.

 

500 ft? are ya wrapping the whole truck? Good luck with the wiring..sounds like ya got it covered... post pictures when ur done

 

500ft must be a long bed truck

 

I'm redoing the wiring for my navigation install, I also have to add power mirrors and run a wire to the ECM for my cruise and don't forget the 120V inverter.
I have 18 gauge but that will be too thick for certain applications.

and yes, it is a long bed truck

 

Just verified all 6 plugs and all 6 are Denso PN K20HR-U11. I don’t know if I’m missing something, I don’t see an Iridium plug.

 

@CBoy808 is the man. Very good prices and great service. Here are my bedsides. Too lazy to go take a good photo so cropped existing photos in my phone.
They match my CA 1960s plates.

 

Thanks buddy.

 

New C4 Hybrid bumper

 

Did some preventative maintenance. Started painting the bolts. Doing em set by set, since I bought an extra.
Painting and greasing the bed bolts.




Not pictured is the other thing I did today, greasing the zerks. Hard to take in progress photos without greasing my phone.
Only did the zerks because I’m not due for the oil change, but the dealer I bought it from has a tendency to forget things when servicing your truck.

 

Awe how cute

 

And something I always applaud

 

Man, good thing you were paying attention!

 

I like .

Agree .

 

Just a little bit of maintenance this weekend. New OEM air filter, and TRD brake pads. Also swapped in Philips LED bulbs for the headlights, reverse, and license plate lights, but no pictures of them.

 

Installed this sweet sticker, and bought an AFE intake to replace my k&n one.

 

I'd seriously reconsider those led headlight bulbs...

 

what seats did ya swap in?

 

Will that pass inspection like that...Pa requires it to clear theside of the truck...soley dependent on the inspector thou

 

Thanks for the info I guess I am making brackets. Or better yet buying a new grill