What have you done to your Tacoma today? 1st Gen Edition

I got 10k out of my last OEM... Currently have 1 Moog and 1 OEM installed. If I ever get it back on the road I'm interested to see how they compare. If the Moog lasts a year, that will be my choice , no sense in throwing $50 extra at a part I have to swap every year.

 

Workin on that weight reduction


Must be fairly new....

 

@Area51Runner

 

Anyone ever have this issue with their coolant temp gauge: ONLY when headlights are on, after 20-30 minutes of driving, the gauge pegs passed H. The actual temp is not an issue, Scan Gauge has her between 187-192 constantly. I've checked the one wire sensor (replaced just in case). No issues with the connection at the sensor; and the gauge was replaced with OEM about 2 years ago for a similar issue (by the dealer). I'm thinking its a grounding issue somewhere inside with the dash. Not a huge issue as I know the temp is good to go; just have some extra time on my hands... Any thoughts would be appreciated. 2004, 3.4, TRD Off Road, Xtra Cab, 4WD.

 

Definitely a grounding issue, check the driver's side footwell wall grounds and the grounds on the intake plenum

 

Thanks for the honest evaluation of them so far. Update us too in a few weeks or few thousand miles or whatever

 

5.5 k

 

That's the labor for the swap right? That didn't include all the parts did it?

 

It was 2.5 for parts and 3k for labor. The new gears and rear locker increased the price. But every project is different

 

That's awesome dude. Seriously. There has been a huge question mark on what an actual completed 4x4 swap from a shop would cost. Thanks for sharing that in general dude. Great reference price point. people will appreciate this.
And if you end up happy with the swap it could be a good idea to say who did the work for ya. Would help the members here find a good shop and help a good shop keep busy

 

Califabrication is the shop who did it. Located in Sacramento, Ca. If anyone needs fabrication jobs done I would contact Chance, He does perfect work every time.

 

Honestly that is less than I thought it would cost. Thanks for sharing.

 

I bought a whole truck for less than that..

 

Any better when i say my taco has 110k miles on it lmao?

 

I will and I can tell you I am real happy with the Monroe coilovers I put up front back in January. The Garage Queen is not my DD so it takes a while to form an opinion. Thanks to covid-19 it’s going to take even longer now that there’s no place to drive to.

 

I had the same problem and it was the rear brake light bulb. One of the filaments came loose and shorted it.

 

No kidding? I'll give it a look, thanks.

 

I got lucky was the 2nd place I looked lol

 

I've checked all the ground locations under the hood. The one you mentioned on the driver side I was unaware of, I'll check it out, thanks.