Ontario BS Thread

oh that must be it then, i've not had issues whatsoever since i well.. have the TRD offroad.

Apparently the sports don't have that secondary OEM skid plate....

 

Since you don't have a TRD Off Road, did you order new fuel tank straps with studs for the tank skid?

 

Too late today. Not even sure if they are open at all due to corona. I was going to get a set of bolts, including longer and smaller size too. But I think I need to tap those two holes

 

you sure it's not a thick sticker or something that has to be simply punched?
Tapping and threading seem to be over kill.
there was some locations on mine i had to use a screwdriver to pierce a hole through a vinyl sticker to pass a bolt through the frame.

the 2 covers to the left there

 

No, I didn't have that one

 

Yes, I did

 

If there is something, it would be some type of a plug maybe, if there was a sticker it would have been destroyed by now. This job would have been so easy if I had a way to hoist the truck up...

 

The threaded holes are there like your off-road. Because they are not used on the Sport models they get rusty and fill up with grit, etc. You're not taping new holes. Just cleaning out the ones that are there. I had to do the same thing when I added my TRD Pro skid plate.

 

see

this makes the most sense to me.

 

Oh I read your post wrong. Ya I’m guna my own wiring for a bunch of stuff I’ll have going on. Hardest part is waiting till it warms up to do it all!

 

So round #2, anyone knows a good shop to have body panels wrapped? I got something that starts with McN....


P.S. Also front Fox 2.0 are going to be here up for sale , should I start a reservation list?

 

is that first on the list?

 

no, that's some guy system that i took a look into, he parked up next to me at Canadian tire
i was just wondering about the suspension that he had

Birds of a feather stick together!

But i am one short truck compared to him

 

Taking pictures of other guys truck unders.... how inappropriate of you!

 

I like to imagine it's a girl's truck and i'm snapping a panty shot.

 

How do you like the Elka compared to the Fox?

 

Finally going with glass after all the sawzall work?

 

I like it a lot, smoother ride. It's basically 2.5 Elkas vs 2.0 Fox, can't compare them really beside the fact Elkas going to be better.

2.0s are more comparable to 6112s

This chopping madness must end...

Got to make it look SEMA look worthy

 

Yes hard to compare 2.5 to 2.0's for sure. Elka on the back as well? Like the quality of the Elka's?