TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

Trd blower w/ 2.8 pulley and other mods

340hp/379tq at the wheels

 

My truck with the 2.3, equal length ypipe & headers, and a 3" exhaust was flowing around 345 g/s so its somewhere around 400hp at the crank

 

back the screw all the way out. You have metal to metal contact and diaphragm sealing. Then turn the screw back in just enough to put tension on the stop but you still want the diaphragm to be completely sealed.

 

Thanks I’ll give that a try. The ping is very faint I assume? since I’m close to installing I have the cover off. Should hear the valve better?

 

the metallic click comes from the screw hitting the stop. If you back it all the way out then that means there would have to be that much extra pressure to open the bypass. You want the set screw hold as much tension as possible yet still keep the valve closed if that makes sense. The ping is faint. It is easier to just close the valve by backing out the screw then turn in to just barely hold the tension.

 

Well the snout bearing replacement went really smooth. Got my hub on and snout dremeled down for the 2.3. And yup gave it some paint



Replacing the needle bearings on the other hand...

 

bought my truck with it. a turbo kit would be great too!

 

It does. thats what was made sense to me. I wasn’t hearing said sound so had me stumped.

 

Much more HP over the 3.0. It allows the blower to spin much faster.

 

was looking at the actual numbers. I definitely understand how they work.

 

Numbers are subjective based on the mods you are running. At this stage in the game the mod combos possible with a 2.3 pulley are too many to give you exact numbers.

 

So you’re saying 500 AWHP? Got it.

 

I got 500AWHP on deez nuts, one time only special just for you!

I joke I joke 2 inchez.

 

NA or FI though?

 

All motor baby. All natural.

 

Anyone done a sleeper Muffler setup? Looking at a 5x8 18". 14249 Magnaflow resonator & 5x8 24" . 12279 Magnaflow muffler.

 

I want a turbo kit. Willing to trade blower plus one roll of tp

 

My toyota Guru's Anyone have an idea what the torque value is for the 2 studs on the secondary air injection noted below? I removed them as it was easier to slide that BS off but since im in CA im tossing it back on.

 

just snug it down. it will be alright.

 

Thanks that’s what I figured.