*reduced* Make offer. 2013 Tacoma Access Cab build For Sale

Hi, I am lookig to sell my 2013 Tacoma. In my opinion this would be a great platform for anyone looking to jump into the process, considering a lot has been established already.

Truck runs to perfection and is a great pleasure to drive as soon as you hit the gravel. Just fine runner on pavement also.

Upgrades started around 60,000 miles roughly 2016. I have not used for anything other than road trips since. I have a work vehicle and do not drive this guy much anymore other than a weekend getaway here and there.

I am located in the Western Chicagoland suburbs.

Please feel free to PM with questions.

2013 Toyota Tacoma 6cyl 4.0L
Magnetic Gray Metallic/Grey Interior
Access Cab/Long Bed
Automatic

86,000 miles

Clean Title, One Owner

SR5 Package
Tow Package

Asking Price: $20,000ish Make a reasonable offer



Suspension:

-JBA Upper Control Arms

-All new Toyota Control Arm/Cam Bolts and Hardware

-Bilstein 6112 Front Coilovers

-Bilstein B110 Extended Rears

-OME Dakar CS047R Rear Leaf Springs (added spacers between each)

-New Leaf Spring Bushings

-Wheelers Rear Super Bumpstops

-Rear All Pro U-Bolt flip kit


Wheels/Tires:


-(5) Level 8 MK6 Wheels in Gunmetal

-(5) Toyo Open Country A/T II Tires (265/70/17)

*Only 13,000 miles

-ECGS 8” Clamshell Case Bushing and Sleeve Kit

-Brake Upgrade to Calibers and pads


Bumber/Skids:


-U.S. Offroad Winch Mount Front Bumper (Black Powder Coat)

-4X Innovations High Clearance Rear Bumper with HiLift Cutouts (Black Powder Coat)

-Pelfrybilt Front Aluminum Skid Plate (Black Powder Coat)

-Pelfrybilt Aluminum Mid Skid Plate


Bed:


-Decked 6’2” Bed Drawer System with Locks and Tie Downs

-Kbvoodoo Side Rail Bed Rail Reinforement System

-Kbvoodoo Outboard Bike Mounts (2 sets) (take ‘em or leave ‘em)

-Helm Fab Bedside Reinforcements

-Wilco Vertical Gate with Spare Tire Mount

-Hi Lift Jack with mounts on Wilco Gate

-Relentless Fab Bed Cross Bars (2) (Black Powder Coat) (+4”)


Lighting/Electrical:


-New Head Light Housings (2) *changed back from HID shenanigans

-Ultimate Headlight Upgrade with wire harness and Relays

-OSRAM Super Bright Premium High Wattage H4 headlight Lamps (2 extra in glove box)

-Morimoto XTorch 40” LED Light Bar

-Morimoto XB Led Fog lights

-3x3 OK LED Side Rack Mounted Camp Lights

-Diehard Platinum AGM Marine Grade Battery 31M 1150cca

-Pelfrybilt Aluminum Battery Cage

-Custom Fuse/Relay block with Fused protection (Blue Sea Systems)

-Custom Switch Harness to Cab with OTRATTW Contura V Rocker Switches mounted in Headliner (Wired to Relay Block in engine compartment)

-Interior Dome Lights and Map Lights LED Swap

-Wiring in place for Bed Lights





Body:


-Prinsu Designs Access Cab Roof Rack with wind deflector (Black Powder Coat)

-Weathertech Side Window Deflectors

-Homer Taco Custom Front Ghost Raptor Mesh Grill

-Airflow Snorkel

-Smitybilt 98495 XRC 9.5K Gen 2 Winch with Synthetic Rope


Interior:


-Wet Okole Seat Covers

-Weathertech Front Seat Floor mats

-RaamMat Sound Dampening of Floor, Doors and Access Cab wall

-Custom Molle Panel for Access Cab Wall (Uninstalled for Original Seats to go back in for selling)

-Trailer Brake Controller


Mods:


-Rear Differential Relocation Mod

-Rear Camera Anytime Mod with Rocker Switch

-Fog Lights Anytime Mod


Misc:


-Mr. Marv “Subless” Stereo Speaker and Amp Build with Arc Audio 450.4 XDI amp, Front 6x9 U69 and Rear 6.5 Coaxial M61 (Huge improvement over stock)

Here are some pics:
















This last picture shows the dent caused by falling tree limb from a camping stay in New Mexico. I thought about replacing with a Scooped hood but…. This adds character, and it was a great memory. I can’t come up with any other flaws other than this dent.



Thanks everybody

 

What would you say the remaining 17% is? GLWS

 

Oh great question...my numbers are in no way a representation of actual field derived data and can fluctuate based on wants and needs. I have a compressor, refrigerator, rotopax, more lighting and rock sliders among other things sitting in garage. If these items were to be installed I can see being at about +/- 91% or so.

 

Reduced

 

PM sent

 

bump

 

bumper

 

reduced again

 

GORGEOUS truck!! Which Chicago suburb? I grew up there...

 

Thanks. Dundee/Elgin area

 

@05prerun82

 

Wow nice truck 20k is high I could see somebody paying 17k for that

 

$20,000ish Make a reasonable offer

 

Very cool truck! Did it spend most of its time in the salt belt?

 

Some time in Utah but yes mostly within the salt belt.

 

Typical rusty undercarriage?

 

Yeah it’s typical but not that bad in my opinion.

 

would you part anything from her?

 

What you thinking about the price right now?