What Have You Done To Your 2nd Gen Tacoma Today?

Nice, another example as to why the Access Cab is so much in demand, And the correct color.

 

Finally scored a cap! Got everything wired up thanks to some of the older TW threads.
still need to add some weather stripping between the bed and cap - what can everyone recommend

 

Did that unifilter mod. Thing came in the mail super fast - almost as fast as it takes to clamp on the filter and trash the old foam. Lol

 

Replaced power steering fluid. I do a full flush about every 50K Miles. Used Maxlife ATF as usual.

Used this method: https://www.tacomaworld.com/threads/power-steering-flush.416379/
You can buy caps for the inlet of the resevoir in the "help" section of most chain auto parts places. Regular vacuum line caps will work.

 

Courtesy of @BartMaster1234

Are YOU Tired of Your WIMPY Stock Horn? Put in 4 Cadillac Horns! [Summer 2020]
https://www.tacomaworld.com/threads...n-put-in-4-cadillac-horns-summer-2020.508390/

Here is the system on my truck compared to the stock horn:

https://youtu.be/ziUYIykYIlU

 

I have had two bed campers. The best fit I got was first putting down some silicone on the front of the bed near cab (There is a thread about it, can't find it right now). That is where there are some natural holes for water to get into. I then used something like this

$17 Camco 25084 Camper Mounting Tape,30 Foot x 1-1/4"

https://www.amazon.com/Camco-25084-...ords=truck+camper+seal&qid=1585167359&sr=8-13 in a double layer on top of the bed rails/under the cap. I also put black silicone inside and outside where the tape meets the bed rail. They cap on and boom. The only water I got in was when I went through a car wash and that was very minimal and went under the bed mat.

 

Added a steering wheel cover today

 

a mod was made. at least 20 HP added. TRD oil cap filler mod
hardest part was getting the back part of the decal off- almost like the clean billet look better

 

What's with the front mudflaps?

 

@Beauxdon Perfect! We’ve had rain all day and the front corners and one rear corner are the culprits right now.
I noticed there is a gap between the rear glass and the bottom of the cap too.

 

I’m gonna say to keep those sliders from chipping

 

Maybe some state law about tires sticking out past the body?

 

My tailgate Pop-N-Lock just arrived. Something else to do.

 

Just something else to add to my shopping cart

 

Yeah what I did was get in the bed at night and have my wife use a flashlight on the outside so I could see where light was getting in. That is how I knew where to make sure to get the silicone

 

That too

 

When you do, make sure you order the updated part number.

 

Watched Boogies Uni filter mod video. Decided to check the filter on my 05, and found it didn't have a filter in it. I have no idea how long it's been gone.
Ordered one from Amazon, it'll be delivered Saturday (maybe).

 

thats a great idea, you didn’t make a video on this did you?

 

Got my oil sample tests in, too!