What Have You Done To Your 2nd Gen Tacoma Today?

To be honest it worked great. I watched a few YouTube videos on this exact bender and just went from there. I didnt want to mount it to anything just yet so I bent the pipe with the bender laying flat on the ground. It was pretty smooth considering this was 1.5" pipe and for $120 bucks im happy. Again, this was my first attempt at bending.

Excited simply for the fact I can build my sliders and anything else I want now at low cost. The price of armor on our trucks is ridiculous.

 

Yea and this bed rack

 

I made it to fit my fiberglass fenders

 

If you have a link for them could you shout it to me please. May not be able to get them right now but would still like to read some

 

$120 from HF I do t remember ever seeing it that price

 

I knew I missed something!

 

What did you use to mount the light bar behind the grill? looking to do the same once I add a low pro bumper.

 

Ditched the Walker Evan's coilovers. Going to give these Kings from @AccuTune Offroad some use.

 

threw these in a few days ago

next up new tires and a lift hopefully by the summer

 

DIY seat spacers with material I already had. I gotta say that I do understand the hype, now.

 

Always loved that blue

 

Any regrets with the GFC?

 

Found them on Amazon. I used a little red loctite on the zerks and on the four bolts that attach the sway bar to the frame. I had to watch a couple of videos to make sure those mounts were in the right direction and the sway bar. Also be careful with the rubber on the links when you are installing. It's a tight fit an I may have cut the rubber. It's still holding all the grease. It will be easy to replace later on, only $18. Just go slow. You'll also have to remove one of the cross members running to the bumper to slide the sway bar in. You can remove both but was able to do it with just one of the two taken off.

$27 Mevotech Supreme Stabilizer Link MS86850

https://www.amazon.com/gp/product/B00A6RO580/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

$34 Mevotech Supreme Stabilizer Link MS86849

https://www.amazon.com/gp/product/B00A6RO4V8/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

 

What brand of headlight?

 

Thanks my sway bar is still in place just looking for end link alterntives thanks

 

I got them used on ebay but they're Tacomabeast/Spyder headlights.

 

For my needs its perfect but I think for the money, you get more value and likely longevity out of a Vagabond Drifter.

 

After the last couple of days I fabbed up the cross tube for the Hammer Hangers. Fun project I took my time as i now apparently have plenty. I made the plates, got all the parts together, tacked the tube in place, and welded it up. Then painted and installed.

 

Very nice. It’s way to clean under there. How do you do that?

 

Added a sticker @SOS CONCEPTS and washed off a pound of pollen.

Corona bites. Boring.