Colorado Trading Post

I have one I no longer need.

 

Wow that was fast. I’ll shoot you a PM.

 

Still for sale

 

NOT MINE, just looks like a great deal.

DCSB softopper.
https://cosprings.craigslist.org/pts/d/colorado-springs-softopper-for-tacoma/7089237077.html

 

Anyone have a used set of seat covers for the rear of a double cab (second or third gen assuming they are interchangeable ) ?

 

with a 1200 as the best offer

 

Does anyone want my struts, leafs or control arms form my '19? You can have them for free.

 

Anyone interested in a 2nd gen (05-11) TRD Sport grill? Magnetic Gray.

 

might be depending how much.

 

Looks like you have a 2014, this one is for 05-11. I'll fix my post.

If you're still interested, shoot me a PM though

 

aww gotcha darn no worries could use a refresh but no hurry.

 

Is anybody interested in a rack that fits over a softopper, CVT Mt. St. Helens hard shell RTT and prinsu roof rack? Looking to sell all of it in the near future. I will also be selling my kb voodoo aluminum bed rail caps when everything else sells also.
I would like to sell all of it to one person to keep everything simple.
$3,300 takes all of it.

 

I upgraded from my stock battery to a northstar last fall and held on to the other battery with thoughts of maybe going dual battery. Long story short wont be going dual battery so putting my good standard battery up for sale.

make me an offer

 

Not mine, good deal on skids. https://denver.craigslist.org/pts/d/denver-3rd-gen-toyota-tacoma-rci-skids/7100436894.html

 

I am interested in the bed rack, bed rails, and possibly roof rack if you decide to split up!

 

id be interested in the rtt. not sure if it will fit on my rack though. depends on how high above the bed rack it goes. i have an 18 voodoo modular that sits just below the cab

 

PM'd

 

PM'd

 

Is this still available? I have been searching around for a topper recently.

 

Bumping and consolidating my list of for sale items...please help me reclaim my garage space!

$100 - DAMAGED 2007 FJ cruiser tcase 175k miles for Auto trans (23 spline)
My dumbass cracked the rear half of the case at the bottom putting it back together because I didn't properly line up the hi/lo shift sleeve. It could probably be welded or JB welded. The case has not been sealed back together so that you can work on it and twin stick if desired. The rear output flange cover should probably be taken off and re-sealed. I replaced the input shaft seal, front output shaft seal, oil pump seal, and shift rail seals. I did not replace the rear out shaft seal or either of the out shaft flange seals but they are included along with a new output shaft nut and shifter base seal. The shifter was hacked off at the junk yard. I dont think I did any other damage except the crack pictured and potentially disturbing the rear output flange cover seal as previously mentioned and pictured.





2009 Tacoma Transfer case 104k miles for manual trans with actuator (22 spline) - $200 PRICE REDUCED

2009 Tacoma front ADD tube with actuator 104k - $100 PRICE REDUCED

2009 Tacoma 4wd ecu - $75 PRICE REDUCED

If you have ever replaced either of the actuators, you know this is a steal on the ADD actuator and the tcase. You'll pay a few hundred for each of those, new or used. These were all pulled from my truck at 104K in perfect working order, actuators and all. I split the tcase to pull the input shaft so I could have a crawl box adapter made. Its assembled but the case is not sealed so you'll have to take it apart to seal it. Theres no speed sensor but the rear output has the required worm gear for the manual trans...it curently has the FJ filler plug. The shift rail sensors are also from an FJ so you'll have to solder your own connectors and torque those. The input flange cover also needs to be removed and sealed and properly torqued. Everything inside is properly torqued.

The ADD tube has the support arm bolts and the star bolts for the diff.





BRAND NEW in BOX Tacoma Speed Sensor for Manual - Beck Arnley (Not pictured) - $50

$77 Beck/Arnley Speed Sensor - 090-5033

https://www.amazon.com/gp/product/B000EOGW90/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
This is for the manual transmission (i think pre-2012 only) where the speed sensor is on the back of the tcase. Will not work for those with speed sensors on the wheel.

Let me know if you have questions or need more pics. If an MT guy wants the FJ case and an AT guy wants the taco case, we can swap the inputs and make that work. I would prefer not to separate actuators from the ADD and Tcase but would consider it if folks want specific parts.

I will also include the in cab 4wd switch which is still installed in my truck for someone who wants the taco parts.

Steel bed bars - $50

Bought from another member like 2 years ago and never used them. Includes mounting hardware to bolt into rails. 61" wide

Edit: These sit on top of the rails and attach via t-slot nuts.




mud flaps - $20



Driver side spindle. 97k miles on it. -$100

I am pretty sure it's not bent. I bent my passenger and replaced both with a set of gusseted ones so this is my original driver.



2nd gen rear extended brake lines - $20

21" stainless steel lines with 50-60k miles. I do not have all of the clips so you'll need to acquire those on your own.

I ran these with the Dakar pack and Archive Garage shackle flip and they were a just little tight for my liking. Would be fine for 1-3" lift and stock hangers or hammer hangers.