1st Gen Lunchtable Thread - General Discussion

That one leads to my crotch. Actually, it might just wrap around from my ass.

 

I got 47.

 

Recount, got 48 this time.

 

12 in one quarter

 

Basket handle

 

TMI

 

I counted 4x and came up with 47 twice and 48 twice

 

The 4runner is a 2003, so...

 

Totally Majestic Information.

 

I got 48

 

I had already recounted and gotten 48 as well.

 

Fastest way to get the right answer on the forum is to post the wrong answer first

 

555= Oem

 

600.


Granted I counted in 5 seconds in 10 increments

 

Dang I figured it would be at least 12 but that's a lot!

 

https://www.instagram.com/p/B-VYSwrnOEm/?igshid=1hlfcefo3hqwq

 

So...several questions: 1) what is in the reservoir, oil or nitrogen, or both? 2) Is it possible to rotate these reservoirs 180 degrees at the fitting circled in blue so that the fill valve is pointing back towards the shock itself without 200psi (I believe) of whatever is in there busting out? It just seems that if that could happen then the hose length issue would be mitigated and I could mount them on the frame at the red holes or damn close. The pic is deceiving as the green circled bolts are on the aluminum box the CBI bumper attaches to and the red holes on the frame are about 4 inches behind and inside the plane the green circles are on. That would be a nice, protected spot for the resis I would think.