Colorado Trading Post

Bumping and consolidating my list of for sale items...please help me reclaim my garage space!

$100 - DAMAGED 2007 FJ cruiser tcase 175k miles for Auto trans (23 spline)
My dumbass cracked the rear half of the case at the bottom putting it back together because I didn't properly line up the hi/lo shift sleeve. It could probably be welded or JB welded. The case has not been sealed back together so that you can work on it and twin stick if desired. The rear output flange cover should probably be taken off and re-sealed. I replaced the input shaft seal, front output shaft seal, oil pump seal, and shift rail seals. I did not replace the rear out shaft seal or either of the out shaft flange seals but they are included along with a new output shaft nut and shifter base seal. The shifter was hacked off at the junk yard. I dont think I did any other damage except the crack pictured and potentially disturbing the rear output flange cover seal as previously mentioned and pictured.





2009 Tacoma Transfer case 104k miles for manual trans with actuator (22 spline) - $200 PRICE REDUCED

2009 Tacoma front ADD tube with actuator 104k - $100 PRICE REDUCED

2009 Tacoma 4wd ecu - $75 PRICE REDUCED

If you have ever replaced either of the actuators, you know this is a steal on the ADD actuator and the tcase. You'll pay a few hundred for each of those, new or used. These were all pulled from my truck at 104K in perfect working order, actuators and all. I split the tcase to pull the input shaft so I could have a crawl box adapter made. Its assembled but the case is not sealed so you'll have to take it apart to seal it. Theres no speed sensor but the rear output has the required worm gear for the manual trans...it curently has the FJ filler plug. The shift rail sensors are also from an FJ so you'll have to solder your own connectors and torque those. The input flange cover also needs to be removed and sealed and properly torqued. Everything inside is properly torqued.

The ADD tube has the support arm bolts and the star bolts for the diff.





BRAND NEW in BOX Tacoma Speed Sensor for Manual - Beck Arnley (Not pictured) - $50

$68 Beck/Arnley Speed Sensor - 090-5033

https://www.amazon.com/gp/product/B000EOGW90/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
This is for the manual transmission (i think pre-2012 only) where the speed sensor is on the back of the tcase. Will not work for those with speed sensors on the wheel.

Let me know if you have questions or need more pics. If an MT guy wants the FJ case and an AT guy wants the taco case, we can swap the inputs and make that work. I would prefer not to separate actuators from the ADD and Tcase but would consider it if folks want specific parts.

I will also include the in cab 4wd switch which is still installed in my truck for someone who wants the taco parts.

Steel bed bars - $50

Bought from another member like 2 years ago and never used them. Includes mounting hardware to bolt into rails. 61" wide

Edit: These sit on top of the rails and attach via t-slot nuts.




mud flaps - $20



Driver side spindle. 97k miles on it. -$100

I am pretty sure it's not bent. I bent my passenger and replaced both with a set of gusseted ones so this is my original driver.



2nd gen rear extended brake lines - $20

21" stainless steel lines with 50-60k miles. I do not have all of the clips so you'll need to acquire those on your own.

I ran these with the Dakar pack and Archive Garage shackle flip and they were a just little tight for my liking. Would be fine for 1-3" lift and stock hangers or hammer hangers.

 

Hello Friends,

I have some OEM TRD PRO Floor mats from my 2015 Tacoma for sale. Willing to ship if buyer pays shipping and willing to meet near Denver area. PM me if you interested.

 

Looking to trade my Russian AKM (saiga 7.62X39 fully converted) for a long barrel VEPR 308 or 7.62x54R

If you have questions related to accessories/magazines, or want more detailed pictures - PM me

 

photo of the battery for sale. Thats just a bit of oil on top cause i tipped over a jug while removing it from shed to take a photo. Battery works as expected just dont need it taking up room

make me an offer

 

SOLD

 

Anybody got any rear shocks laying around for sale? Preferably smooth body Icons but willing to consider others. No lift or up to 1” , shoot me a note. My brother in Colorado Springs has meaning Icons. Would even consider trade for rebuilt plus money if possible.

 

For Sale: Bakflip MX4 Hard Tonneau Cover - Long Bed

Hard bed cover that has been water sealed & taken good care of & ready for a new home. Has been an awesome bed cover that keeps water out & allows you to lock the bed so that your belongings are safe. Bed cover is very strong, will hold up to 400lbs. Super easy to install. Link below for more details on it.


https://bakindustries.com/bakflip-mx4


Will fit a 3rd Gen Toyota Tacoma Long Bed (6ft) - only selling due to getting a topper for my truck.

Denver area
$500

 

Hot damn that's a steal. I'd take it off you in a heartbeat but I have a short bed.

 

Damn.. I am jealous of that home wall right now. Is that a crack trainer next to it?

 

Haha it sure is. Unfortunately seeing a lot more use this past month or so, but at least keeping a little sanity

 

SOLD

 

Cali raised brackets still available? If so do you have the mounting hardware? (I assume it's just a couple bolts but just curious)

 

SOLD

GEN 1 upTOP Truss.

1/4” 60 series aluminum, bent and TIG welded. 41 LBS! Will work with 5 or 6’ bed and can be adapted to 2nd gen trucks (will need to drill holes in feet, i will help!) All Black powdercoat. Happy to help install.

Alpha eX (Basket/Tray) not included!

$750 OBO

 

Looking to trade my Russian AKM (saiga 7.62X39 fully converted) for a long barrel VEPR 308 or 7.62x54R

If you have questions related to accessories/magazines, or want more detailed pictures - PM me

 

My apologies. I sold it the other day and forgot to update this thread! Good luck

 

Sorry, Sold the Cali Raised Brackets and the BPF Tow Hook.

 

Your good thank you!

 

Looking to sell my send gen silver high rise ARE topper. Two keys included for back window. Missing keys for top cross bars. $1250 obo

 

ARB inflator deflator $20 SOLD

basically new, never used

 

Total chaos 2005-2015 Tacoma spindle gussets never welded them up

Will also fit 2003 + 4R 2007+ FJ

$40 SOLD to david at Toytec