I have a 1" lift in the front... Can I fit 33"s

I shared knowledge already if you scroll up near the top

 

Lol good point, because I'm lazy and if no one wants to comment thats fine, if they do then great. Philosophical debate on a truck forum is great during quarantine lololol

 

Yeah thanks, it didnt totally answer my question but still appreciated

 

Itll be 31s now lol

 

So.... I went with 265s.... and there's no rub

 

Looks good. 275/what?

 

Doubtful you could fit anything other than what other members have recommended. I have 2.5" front and my tire gets shredded on tight technical turns with full suspension compression. It used to be worse but I still have some rubbing full lock, aired down.

Cmc, trim ALOT of bumper, pinch weld needs to be flattened, MORE trimming. It was a good month ordeal for me and it's still not perfect. Here's some pictures.

LT285/75r16 Wildpeak AT3W + Enkei RPT1 16x8 -32et

 

Another happy ending!

This question is asked a lot with little information provided. Do you know the size of your wheels and offset? 16x what? offset is what? +/-? Maybe just leveled or lifted with a spacer or settled coilovers? Even tires of the same metric can be different sizes. I recommend checking the manufacturers specifications of the tire your interested in. Glad it worked out.

 

Most would say you needed minimum 3" lift for 285's and CMC/custom pinch weld work to fit a -32 offset wheel!

 

Just the offset of a wheel can make a big difference in fitment issues...

 

Indeed. The offset I have in the front causes it to rub more out the outside edge of cab mount and fender/front bumper. 0 offset does not rub much if at all. I personally don't like any less offset because it aesthetically looks off when the front wheel is so much further in the wheel well than the rear.

As long as you're willing to put in the work, almost anything can fit!

 

Lol typo I got 265s

 

265s (typo) edited by post. Yeah 275s would be giving my truck a stiff rub down lol

 

I know it gets asked a lot but I was curious if anyone had the same suspension set up and tire size. Glad some people were willing to give me advice instead of the ol' fuck off replies lol

 

OK, we still don’t know how tall your tires are. What’s the 2nd number?

 

They sell 3 sizes of 16" Falken Wild Peaks in 265 and they don't make a 275 in 16"...

LT265/75R16 31.7" height 10.4" wide

265/75R16 31.7" height 10.6" wide

265/70R16 30.6" height 10.8" wide

 

75