st Maxx 285/75/17 owners!!

How true to size do they run as a “34” once mounted to a wheel? Website mentions 34.06 x 11.01. Curious how they stack up true size wise compared to say Toyos 285/75/17.

pics welcome!

 

Never measured my 285/75R17’s on the wheel, but definitely larger than my 285/75R16’s were.

 

The Cooper STT MAX seem to be a true 34"

 

You both have some CLEAN looking rigs by the way. Any shots from the side?

 

not on my phone, but I can shoot some tomorrow.

 

sweet, thank you. In that pic do you have spacers or is that the angle playing with me? Lol

 

I have spidertrax installed

 

Anyone gotten around to measuring these mounted to a wheel?

 

Clean! I’m trying to picture how much poke id potentially get with that same 17” t4r wheel with no flares on my SR

 

I dont have any good down the side shots.

 

any issues clearing UCA without spacers?

 

I have aftermarket UCA's. Its actually a better fit without spacers!I recently put spacers on and i got a little tire rub on bottom fender closest to the cab. I dont have any pics with spacers on. But if your going to run the same wheels i have you should be good to go. You will need a CMC done if your wheeling.

 

Truck looks great, time to cut that tail pipe though...

 

Good idea!

Good Idea!!!

 

Not sure if you're serious about that comment. They should be an inch larger.

 

Nice, like how you put the very end back on. Mine is just cut off and done.

 

I’m not worried about fenders, cab mount, etc. I’m worried about rubbing the UCA with no negative offset.

Already have deep cmc and fender/liners pushed back when I fit 285 on stock suspension.

and that’s right where I cut my pipe too!!

??? didn’t he literally say they’re definitely larger lol. I’m confused....

 

His comment was the equivalent to my 35" tires are larger than a 31" tire...yeah, no kidding.

 

I would recommend you get UCA's