Long Travel BS Thread

what kills it for you is shipping. i picked mine up directly from glassworks during july when tim was having a discount

i think i paid $425 out the door w/ tax

you are prob just gonna have to bit the bullet and pay the $$$

 

Anybody know of any plans of any 2" bedsides for 2nd gens any time soon? I'm afraid the 4" fenders will be way to big on my mid travel truck.

 

not that i know of

you could do the 4" bedsides and run some wheel spacers on the back axle to fill in the wheel well and get some extra track width.

i'm going to be running spidertrax on the rear of my truck now

 

Yea, but I want the front to match the rear. I was going to go with AP in the front. If I went with Glassworks it might look weird with the front tires tucked in so much.

 

hey guys i figured you knew more about the LT fenders what do you recommend im just going for the look up front since i got the 4" spindles that stick the tires out a bunch think it would be a nice touch with everything else i have done to the truck

 

the 2" All Pro

the others will be too much bulge

 

when they say" These are a "bolt-on" fender, and like all fiberglass parts they do require careful trimming and fitting for a proper installation." what does that really pertain and all?

 

you have to drill the mounting holes in the fenders, might have to sand the fender down in some areas to get it to fit right... you might have to show the fender some tough love to get it to fit well and line up with the body panels of the truck

it's not that hard, it can take some time though... and beer. well, for you some sunny delight

 

DAMN man Sunny D is the shiz. so maybe i should have assistance from somebody that does body work if i get them?

 

haha, sunny D is good.

dont have a shop do it cause it'll cost way too much. like i said it's not hard, just time consuming

get some buddies together and get it done on a saturday

or drive out to california, i'll help ya haha

 

ok going to start driving now. whats your address? lol
i know people that own and work for body shops

 

if you got the hook up then yeah, have them help.

but be there when they are doing it so you can learn something new

 

just got off the phone w/ the shop owner of Frontline, Karl.

he's gonna bust ass this weekend and knock my truck out. i should be able to pick it up monday morning between work and school.

SCORE!!!!

 

x2

 

Pismo???

 

So After a little messing around under the hood and cleaning the mud ball of an air filter on the truck I finally have my power back!!!! 9+lbs of boost off my TRD Supercharger! Needless to say my clutch wasn't as happy about it as I was

 

^^^ shut up

i dont want to hear about your supercharger...

 

So what's the word Matt?