FS: Feeler- 2013 DCLB- $20k- V.A.

The passenger side fender was the one that was beat to shit before resto started if you remember the original pics. But I'm damn sure I got everything straighten out when I was putting on new metal and sanding. I also dont see any deformation at all

 

The two lower gaps are different. Not sure if it means anything...

 

He's FINALLY working on the Cuda!! This is a watershed moment!

 

Yeah I loosened the bottom to help me adjust.

 

I don't think its gonna be perfect based on the damage done originally but if I can get close, it's a win. I'm also having problems with the driver side rear window actuator, it appears that someone took it apart previously and didnt put it back together properly. And I cant seem to get it to fit the window correctly now. The passenger side rear window is good

 

Is the fender removable? Doesn't look like it here.

 

You should have @Schwartz help you.... he is a master at body work

 

That part behind the headlight is part of the fender. So the headlight goes on after the fender. Those 2 holes to the left of the headlight is where it connects

 

Yeah, I've seen his work

 

If you can’t fix it with a hammer you’ve got an electrical issue

 

Have you exhausted all of the adjustability in the right fender?

 

Next step is duct tape

 

Moar bondo

 

I haven't, but what stopped me is the right fender is absolutely perfect. Like it lines up with every curve and panel next to it so perfectly that I didnt want to move it. And i didnt see anything that would point to that causing the issue on the other side because the way the front end sits

 

We are talking the right fender on the car; the passenger side, correct?

 

Oh I thought you meant the driver side. I've been moving the passenger, but when I get it lined up with the front. Then the back near the door doesnt line up.

 

I also just found a tiny rust hole in the fuel tank that I didnt notice before. So now I have to buy another. Luckily they are only around 300 bucks from what I've found

 

So, the driver fender is straight and aligned. The passenger fender, which way are you moving it to align it with the grill surround?

 

We got a few years before needing a fuel tank.