1st Gen Lunchtable Thread - General Discussion

New cluster, armor, LT, tires, lights, oba and switch cluster.


Pretty please Dan

 

MkII

 

Woah that’s a lot. And again, I’m lacking anything to fab stuff. I can get the front lt all bolted up and aligned. But the rear your on your own

 

Rear is staying as is lol. It's staying Mid travel but it's getting redone later.

 

@Wulf https://www.instagram.com/p/B-rh6EFo-Vn/?igshid=qjlmvdl0hv2q

 

Just 3 link it with leafs

 

find a car to barrow and leave your truck with me for a few days and i'll get the front installed. and the cluster. OBA and shit

 

No

 

Can I borrow one of yours? Lol

 

what do they bolt the limiting straps to on the 1st gens?

 

currently all my vehicles are in use.

 

There's usually tabs on the lower arms and then you weld your spring loaded limit mount to the frame

 

Weld 2 tabs one on the lca and the other on the shock bucket I think.

Damn

 

damnit i'll actually have to get the welder back out again.

 

I have to drive up to your place and drive the truck home front fenderless lol

 

or you just do the fenders first?
i mean if you really want to get this stuff done soonish i'll have to make sure times set aside at work to do the alignment and what not.

I would get rear wheel spacers to get the rear tires spaced out the same as the front for the alignment.. our rack doesnt play well if the heads are slightly blocked... and they may be with the LT

 

I won't get those until this virus is done with

 

but you wil need to leave the truck with me for a few days if you want it all done. suspension will take a good part of an entire day if your cam bolts are seized. the OBA and stuff, do you have a fuse panel/relay box?

 

Not an aftermarket one lol but I can order a blue seas one and you can wire it up ready for a dual battery setup I guess. BTW how much you want a day for all this work lol. A pizza ain't going to be sufficient enough lmao

 

we'll talk over text the sooner we get to it. i'll be fair.