3” on 34’s 285/75/17 O offset on 17x9

Hello here is my first post! I found some thread on 285/75/17 (34”) but not my amswer. I have a 3” OME lift and i ordered a fuel d666 17x9 +1 offset. I want to know if îm gonna clear my stock UCA with that offset?

 

It’s gonna be close.

 

9" wheel with +1 equates to just a tad over 5" backspace. You're going to be very close! You'd be better of with a -6 or even -12
Offset conversion chart

 

Thanks guys îm goona with -12! Gonna be crazy!

 

-12 on a 9" wheel will probably cause rubbing on the cmc. I'd suggest the -6 if you can get it. I have 17x8.5 with -10 and my 305/65/17's rub the cmc slightly at full lock. A 9" wheel is pushing that extra 1/2" out. If you're running 285's, an 8.5" wheel would be better if they offer that.

 

That’s it -12 offset 4.5 bs on 285-75-17 rub a lil on flat ground but not on the mount

 

Looks really good!

 

Did you do any fender cutting or cab mount chop? I have 2.5 inch lift and going from 285/70/17 to 285/75/17 just hoping it doesn’t rub terribly