What Have You Done To Your 2nd Gen Tacoma Today?

Nice wheels!

 

Hell nah!!! I have have a blue LED dome as well. Lighting looks great!!

 

It's better late than never. I wish I could do a lift but she wouldn't be able to fit in the garage.

 

You could do a 3 inch lift and get 3 inch shorter tires.

 

Damn how tall are the doors? I only have standard 8x9 doors but it fits 2” lift with 33’s 4” in the rear with a roof rack. Not doubting you at all just curious

 

Heck no that's sexy

 

The top and bottom of the enterance is about 6feet 7inches. Plus, there's a slight hill going in.

 

Yeah I have a little hill going up to the garage then the apron is a slight step up. I’ll have TW measure mine. I know I’ve had a couple of lifted trucks with 35’s in there working on them.

 

Nice!

I think i just need to do it and see. The plan was to have a simple 3 inch level with 285s with the trd pros. My gut feeling is it won't pass the entrance

 

Ok I couldn’t stand it so went and measured. Sorry I’m bored. From the concrete to the bottom of the door when open is 6” 7 3/4”. I clear fine the only thing that hits is the antenna, so I stalked a 14” antenna, and the cab antenna which I fold down to drive in. Hell man my snorkel even clears fine and I think that’s taller than the roof rack.

 

Don’t lift. Perfect as is!

 

Finished all needed repairs on my recently purchased truck. Looking good just unfortunately a a/c leak I’m not able to find. Replaced a/c condenser was working then no more.

Still thinking if to go through with lift or not...

 

Lol thanks Jason! I prolly won't cuz it won't fit! Maybe its a good thing.

 

LOL!! Thanks Chris for the help I really appreciate the help. I think i need to see it actually passing under the beam for myself to see how much clearance I have before I do the lift.

 

I’m stuck here at home furloughed so I kinda jump for something different to do. I’ve just about ought up on all my house maintenance stuff. Honestly truck looks great as is I didn’t want you to get the impression I was encouraging lift I as just curious

 

Installed these ABS sensor guards



And installed these fuel can holders using Rago Fabrication bed rail mounts

 

New pads and rotors and a touch of VHT mistry color header paint for the hell of it. I swear the cap is red but the paint is more orange. pretty decent mediocre job none the less and had a good time doing it

 

I cant beat this classic

 

if you can find a used millermatic 141 thats probably the best bang for the buck, even new they still aren't too bad. have had a few different 110 welders and that one was by far my favorite. Got a shop with 220 to consistently work out of so sold mine to a good buddy of mine.

 

Thanks for the info. I'll write it off as my " very early" retirement gift... to myself.