3rd Gen VCS after lift

So recently installed OME 887 coils, Bilstein 5100’s all the way around with the adjustable struts in the front and an Icon leaf pack 51100. Now I know I’ll need an alignment, but waiting till after this weekend so I can readjust some things. However, 2 things I noticed: my ABS, Traction Control lights are on and I get “Check ABS” and “Check Traction Control” also my Cruise Control will not engage and also get “Check Cruise Control”. I searched on here and found the issue with the VSC, tried the little trick and had no success, I plan on checking my brake lines in the front because I’m certain that’s where my issue is and also remember possibly stretching the front passenger side one when trying to bolt my Upper Ball Joint to the UCA. Anyone have any suggestions?

 

It's your front sensor.

 

Wheel speed sensor I’m assuming? Guy at a alignment shop pointed me in that way. Think it’s my front left or front right?

 

Pretty sure that's the only thing that would shut the cc off.

 

Rock Auto it is.

 

So did some looking at the speed sensor harness, looked a little iffy, replaced the driver side and it worked, no more lights and CC works

 

This isnt the sensor, you stretched the wheel speed sensor wiring harness. I did this 2 weeks ago. Go to the dealor, have them check it and then they can order you another one. It cost 70 bucks and the installation is super easy

edit: just saw your last post, glad you got it figured out

 

I got mine off TRSshop.com, $50 shipped

 

Classic stealership

 

Oh believe me, I looked everywhere for that damn harness.