What Have You Done To Your 3rd Gen Today?

I like what you did with the red accents, and especially the SR5 on the air cleaner cover.

 

Ogfab Above the window molle panel.

 

Buddy and I built my RTT rack today. Now just got to clean it and then paint it. Built it so that the RTT sits about 7 inches above/below the cab. Used HREW 120 wall 1 1/2 OD. 3in angle and then cut the side to follow the contour of the bed, and then trimmed the inside to still be able to use my channels. Angled the tubed to fit the lines of the cabe, and the front hoop to act as a bit of roll protection, and matched it to the shape of the cab as best as possible. Super happy with how it came out. Also it's pretty light, I can lift it out of the bed and carry it off the tail gate by myself. I'm guessing somewhere around 70 pounds.

 

Any further feedback after having them a few days? Going to be buying tomorrow.

 

Stick with the black

 

Put a rooftophouse on the prinsu rack!
Its a split level with a carport...

 

Didn't realize this existed lol but don't rattle can to often to warrant it

 

You can get those which are cheaper or get @CBoy808 to make you some custom ones. Cost a little more but great quality and he is easy to work with. Will help you design it if you have ideas of what you would like. Check some of his work.

https://www.tacomaworld.com/threads/custom-stickers-made-in-hawaii.626268/

 

Installed an AMP BedXtender XD I picked up on Amazon for $175. Wasn’t even a single beer project so now I’m just drinking the second beer as I wait for the new bumper caps to arrive to swap the white to black.

 

they un-screw and you have to break a few things.. but I brought them to a custom Upholstery shop.

 

Had a productive weekend (even tho the sound system isn't done). Got distracted and installed new fog lights and repainted one of my chrome wheel logos. Also waxed my taco so it’s shiny.

 

Not if you serve them with mashed potatoes and gravy!

 

So far so good, not even comparable to the stock bilsteins. Don’t regret my purchase.

 

Been away from the site for a while. Few weeks of work after trading in the 2011 Prerunner for a 2020 TRD OR.



Few small updates immediately this weekend since had a little time off work. Blacked out badges. 3D tailgate inserts and got little man working installing OEM bedlights.

 

Well... The wheels supposedly came from China, so...

 

Why do you say they’re Mexican?

 

Trimmed my front inner fenders and flares pretty much to metal to clear 35s. Going to have to CMC. You can see where tires rub body mounts.

 

Hope everyone is having a great Easter Sunday. Jesus is my good news outa all this pandemic chaos and nonsense. People will pass away, but Jesus’ resurrection gives me hope for a new normal in heaven...

...as for the Taco, the Holy Spirit helped guide me find a way to fit the “saving grace” of the new bigger full size spare tire at the factory location without having to relocate the drop down hitch mechanism. Can still feel a little more secure while out on the streets or the trails with the new spare on board, but still have room in the bed or racks (it was in the bed the past couple days taking up valuable bed space) and avoiding having to buy a swing out hitch rack or rear bumper to mount the spare onto. Tires are Nitto Ridge Grapplers in 285/70R17.

Just got some foil tape at the local Autozone and put some on the spare tire section nearest to the exhaust. Hopefully, it helps protect the tire from the heat and doesn’t melt.

 

Few upgrades since I brought her home:
- TRD Pro grille w/ garnish
- TRD Pro Fogs
- TRD Pro Tails
- Morimoto XB headlights
- Blackout badges
- MESO turn signals
- Fox

$1,023 2.0 IFP Fox 2.0 Performance Coil-Over Front Pair compatible with 2005-2016 Toyota Tacoma

2.0 IFP all-around w/ Icon progressive AAL
- SCS Ray10’s (17x8.5 -10)
- Falken Wildpeak AT3W (265/70r17)

Soon: TRD Pro skid, MESO Total Stage 1 (patiently waiting) and a much needed wash