Texas Classifieds 2.0 - Read Post #1!

How old are tires??
Any curb rashes on wheels?
What's the weight of the wheel and tire?

 

I’ll check this stuff tomorrow. Not sure of the weight. The wheels are aluminum.

 

2nd or 3rd gen Tacoma Full skid plate set. $450 takes the whole bunch. Prefer to sell as a whole set. I can meet in Houston on the weekends if needed.

Got rid of the wifes 2nd gen so I pulled these off before trade in. IFS, Transmission and Tcase skid as well as some BAMF LCA skids.

The skid plates are all homemade from 3/16 the steel. I took the good parts from different companies design and put them together. They have held up great and have nothing wrong with them. As you can tell they were used quite often.

I have the hardware I used to mount them, it is still good just dirty. I cant split the set because the all match up with themselves not any other companies. They will all need a cleaning and paint job. They will fit both 2nd and 3rd generation Tacoma's, I used the same build pattern on a bunch of skids I have made for other people running them on 3rd gens and they fit with no issue.

 

Anyone in the concrete buis ?

Looking for a driveway and patio. my rough estimation is +-10 yards.

In the city of Burnet

 

Id like $1000 for the rack and cover setup, id like to keep them together as the cover rails have been modified to fit with the rack. Keep in mind the bed line is shorter and narrower on the 2nd gen so the rack may not fit as tight. It mounts to the bed rail system.

 

What's the thickness of the plate of the skids?

 

Is this for exhaust reroute or no?

 

They're all 3/16th thick.

Yep it's got the bump to fit over the stock exhaust location.

 

bump, gray connector fixed with a replacement from ARB. SOLD

 

@D-Taco

 

I bought a 3rd gen bed rack and just had to drill new holes for the rack to sit flush on the bed but they work.

 

This one has oblong holes so that may do the trick.

 

Most of the new racks do work between the 2 gens. Mine is an older relentless rack or something because the new ones have holes for both gens, but mine is 3rd gen only.

 

Got another custom alcan spring set. +200lbs constant load, 6-1/4" lift. Approximately 8k miles. All bushings are in great condition. Asking $500.

 

Hey you’re using the flag pole holder!

 

You know it!

 

Fucking wants, need this stim check

 

Stimulus check bump! Keep the money local and help me finish my Diesel swap

 

Willing to ship?

 

Thinning the herd.



PSA 10.5" upper
Anderson lower
SBA3 brace

$550
No sights.
Can sweeten the deal with 2 30rd mags.

FTF w/ BOS.
Located in San Antonio.