Whiskey Cabinet BS

I've seen a ton of BP lately but nothing over the 132.9 that I picked up... The other one I have is 132.8 haha

 

The symphony stuff was awesome to me!

And which country song? I know they've done a bunch of covers over the years.. which one you referring to?

 

No Leaf Clover is probably one of my top Metallica Jams!

 

Here's some of my collection...

 

Mama Said. Off Load. That album and reload are by far my least favorite.

 

@Kanyon71
Per our other conversation...
I didn't think about wiping off the powder on the Craftsman part until I had already done a few of them. I think it looks better that way but I've never gone back and ground off the powder on the first ones.

Basically I built a rack to hang them out of steel then shot them and the used my finger and thumb to wipe off the powder before they were baked.

For being over 20 years old.. they've help up remarkably well!

 

send them off or do them yourself? Looks awesome!

 

That’s pretty damn cool looking. We have a bunch of room to configure the oven multi ways. There is also going to be a bar running side to side up towards the top to hang longer things from. Going to have to try out some wrenches.

 

Oh I did those myself back in the day. Pretty sure I was one of the first ones to order a powder coating kit from Eastwood... Bought a electric oven at a garage sale for $15 and did a bunch of stuff in my ex father in law's garage for his hot rods etc.

When I built my garage I wired it for 220 to have my own oven etc.. just never got back into it after the ExFIL passed.

If I had a big oven or some heat lamps I would seriously powder coat the Whiskey Cabinet

 

Sounds like you need to get a big oven.

 

Haha I just looked at prices on the lamps... Nearly $800!

Looks like my $4 cans of spray paint are gonna have to work!

I would be paining today but the winds are kicking.. 21mph gusting to 48!

Guess I'll have to wait to paint.

When I painted it the first time I built a booth out of pvc pipes and plastic sheeting. It worked but I didn't build it big enough to be able to walk all the way around it. The end result was a crappy paint job.. going to attempt a 100% improvement this time

 

Big commercial fridge. Just sayin.

 

Heck if I had a big commercial fridge o would get into making sausages and pepperoni and curing whatever else I could think of.

 

I did spend the afternoon finding 5/8 of an inch in the cabinet to be able to put wood on the bottom shelf too. I also made a double step for the shelf that will hold all the 750s. My only concern now is the shelf holding all that weight! Haha

 

It was a dead one when we got it. we are giving it new life.

Could always use a little angle iron under it to reinforce.

 

Yea.. I have a couple of ideas on how to incorporate the angle iron if needed. Had to make a bunch of small changes to account for the wood on the bottom shelf.

 

Good progress. Can’t wait to see it all done.

 

Me too! Hopefully by the end of the month!

 

A little high gloss poly drying in the sun