What Have You Done To Your 3rd Gen Today?

In my best Paris Hilton voice.. that’s hot.

 

Not really, I actually wired it to the cargo light switch, so it comes on with the power locks and when the door is open or with the cargo switch. the wire for the cargo light runs along the sill plate so i came up through a rubber plug and tapped into the wire.

 

Ahh, the spin on filter - miss that one too. 10 minute job turned into a PITA task with custom tools and skid plate removal

Loved my 2nd Gen AC. I think the AC version is my favorite look for a Tacoma. Biggest issue for me finding a new truck to replace my '06 was the rear jump seat design change that happened mid 2nd generation. Only got a DC 3rd Gen because it didn't seem like a fold flat jump seat was available much past my '06 - and why the hell can't you get a 3rd Gen DC LB MT? but I digress. No one sits in the back of my truck, I just need a nice flat place to put all my crap and didn't want to custom build a platform like I did in my old S10 and others have done here for their pups. The '06 seats were perfect when laid flat and an option (though miserable) when needed for a small butt or two on a short trip. I mean, geez even Dodge can make this work.



And I do miss the size, simplicity, interchangeable front seats, and (believe it or not) the manual front hubs to allow me the 2LO option that I'm trying to get set up in the 3rd Gen

Okay... </OldManRant> - now get off my lawn

 

I like that a lot. It looks awesome. What lights kit did you used? Can you identify with wire you tap into? Thanks in advance.

 

I don't remember the brand but I will take a few more pics of the and the wire. stay tuned

 

Looking forward to the pictures. Thanks

 

Don't recall if I've done so or not already but if I haven't, welcome to TW!
Hello Prevagen!

 

Better take care of that sore throat.

And no, to those who have their mind in the gutter that's not how I meant that!

 

Off Grid Engineering "Side-by-side" dual battery kit with 2 Odyssey PC1400 Group 35's. The house battery to a circuit breaker, fuse box, then the Blue Sea panel you see mounted in the bed. Powers 2 heated blankets for like 8 hours on high Couldn't be happier!
Obviously a couple of the pictures are not from the final product. Maybe i need to do a quick photoshoot with the final product

 

Looking forward to the photo update.

 

Finally got some good weather to paint and mount my @SOS CONCEPTS sliders! They came out pretty good but had some confusion when we went to mount. Eventually figured it out though! I love them!

 

so these are the rock lights I used only problem with them is that the wire comes out the back and I didn't want to put unnecessary holes in the floor, I had a friend 3D print some blocks to space them out then epoxied the blocks to the light and dbbl side tape to the body. the cargo light wire color is light green, beware, there are a few light green wires there...

 

Did not know the headrests can be held there when folded down!
TIL

 

Wonder how the double sided tape is going to hold up in the long run.

 

how did you seal the box?

 

Shift gate vinyl and LED dome lights installed

 

they have been on for 2 winter seasons now. If you use the 3M brand with the activator it will hold until you chisel it off.

 

Glad I’m not the only one!

 

Add me. Almost never put my seats down except to vacume and access the under seat storage and when I did I always pulled the headrests.