What Have You Done To Your 2nd Gen Tacoma Today?

Retrofit Source, great product that looks stock. Look out for sales worth your dollar. You will need to order the oval, they look round after install. I use my LED fogs as running lights through out the day.

 

Plug and play

 

Finished throwing my suspension back on after the rebuild. All new hardware all around! And then replaced the gas cap on my bike after my seal cracked and started letting rain water into the gas tank. Then gave her a bath

 

Hi everybody, I am new here. I like a lot of people have been at home, not by choice for the last 4 weeks, so I have had a lot time to browse TW. I have read the last 2500 pages of this thread, that and a beer have been my go to after the kids are in bed. It’s funny reading so much in a short time you can see the progression of people’s rigs very quick, and see all the regulars. I almost feel like I know some of you now, haha.
Any way I figured I would get in on the fun after being inspired by many of these posts, so here are a few things I have don in the last 2 weeks. Along with changing the oil in the diffs and t-case, spark plugs, throttle Body and MAF sensors cleaned too. This is a cargo net out of my Camry I converted. It works great for hats, gloves and jackets.
I made these holders out of some Kydex I had kicking around and this organizer for the console and lastly here is picture of my tuck last week in some fresh spring snow and now I am going back to page 7000 read a few hundred more posts in this awesome thread.
Cheers everybody

 

Kydex idea looks.good , may need to copy

 

Get the SS3 Pros (Yellow SAE/DOT) Fog Lights

SS3 LED Fog Light Kit for 2012-2015 Toyota Tacoma​

https://www.youtube.com/watch?v=QnxGetMr5aU
https://www.youtube.com/watch?time_continue=49&v=sipi34x6la0&feature=emb_logo

 

http://www.hopkinstowingsolutions.com/products/vehicle-side/7-blade/48470.html

It's the hopkins multi-tow connector #48470

 

Took a side by side pic with my daughters best friend’s Stock 3rd gen.

 

http://www.hopkinstowingsolutions.com/products/vehicle-side/7-blade/48470.html

 

I was pretty happy with it, then I saw the guys with the elastic web panel that fits on the lid, I think I will Change it out for that in the future

 

Purchased and installed pelfrey ifs and mid skid.

 

Installed a new aluminum battery tie down bracket from eBay.

 

Why wait?!? Help me help you

$17 Cocoon CPG5GY GRID-IT!® Accessory Organizer - Small 10.25" x 5.125" (High-Rise Gray)

https://www.amazon.com/gp/product/B0030BERUK/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

https://youtu.be/ypkfW_tE20U

 

Yep that’s the one, thanks. I can see I’m either going to have to memorize my credit card number or start keeping my wallet a lot closer. Haha

 

Cancel all cards and PayPal immediately.

 

Closed around here in Wisconsin

 

So with everyone home,or most of us and lots of projects / stuff were doing I thought I would mention that if you are using a chemical and curious about the right way to use it as in safe manner or store it etc you can type SDS and the chemical, it will lead you to a free site with all kinds of info..

, https://www.wd40company.com/partners-suppliers/msds-sds/ as example

example
some of the things I have found in every day cleaners sold in any parts store include organic solvents...bad stuff, absorbs thru the skin, attacks liver and kidneys, nervous system....

be safe

 

Upper BJ on my SPC UCAs failed on Easter. Luckily I have nothing but time to fix it. Decided to rebuild my entire front end, and the bottom pic is the current state. Need to still get the outer tie rod off and press out the LBJ while waiting for parts. They're both stubborn as hell.

 

I put gas in my truck for the first time in 5 weeks today

 

That is a good deal for a truss.