2005-2015 Tacoma Hefty Fabworks Front Hybrid Tube Winch Bumper

Hefty Fabworks 2005 - 2015 Toyota Tacoma Tube Winch Bumper






Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA virgin steel, the 1/4" thick mounting plate, 3/8" thick uprights, and sleeved integrated recovery points make this a very strong and lighter weight bumper vs most steel bumpers on the market for your Tacoma. Yes you can run this bumper without suspension modifications but we recommend 650lb springs for your front suspension when running a winch. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Available for all models and years for the 2nd Gen Tacoma.

Bumpers come raw steel ready to be coated by you.

Winch capable up to 10,000 lb with non integrated solenoid. May require relocation of control box to fit winch.

This bumper requires trimming the factory bumper cover.

Mounting tabs for 3 lights on top bar and additional mounting locations for aftermarket fog lights in the bumper wings (7 tabs total). Most 3 1/2" fog lights or Pods will fit. Fits up to a 30” light bar (may require a U cradle or other mounting bracket to work), two Baja Designs LP9's, or three Baja Design LP6's or similar.

Bolt on application

Items Included:

(1) Bare Front Tube Bumper

(1) Aluminum Filler Panel

(1) Frame Mount Set

(2) 12mm x 35mm Bolts

(14) 1.5" Fender Washers

(6) 0.5" Grade 8 Bolts

(6) Lock Washers

(6) 0.5" Nuts

(8) 3/8" Fender Washers

(8) 10mm x 45mm Bolts


Weight: 98 lbs

https://www.heftyfabworks.com/store/2005-2015-Tacoma-Front-Hybrid-Tube-Winch-Bumper-p190021467

contact: @Ice Horse for sales

 

Thank you for sharing best looking tube bumper I have seen for the 2nd gen.

 

cant wait until someone buys this and then beats on it a little and resells it so i can afford it

 

Cheap ass.

 

**broke ass

 

I actually really like this. And that price isnt horrible either.

 

any pics of low hoop? would love to see

 

We should have photos soon of one on a Tacoma, just waiting on the customer to install it. It’ll look similar to this: