Northern Virginia Roll Call

the reflector is mounted on the original rotating shaft but was geared to be driven by a worm gear that was mounted perpendicular to the shaft so if i slap something below i might get water intrusion so not sure yet. If the wind blows the old reflector assembly will turn in the wind currently.

 

I thought the reflector bowl was to mimic the GCA

 

you might know more about the stuff than I do since you are using industry terms. My idea was to have a small beacon type light on top of the old reflector. Either flashing at 0 or just being on permanently. Kinda like a lighthouse without the rotating light since it would draw more attention than needed already.

3 of us are ultra close to Peters Mill also in case something should happen and need repairs on the fly.


Also; had shared with just Adam but Wiha Tools are 50% off:

https://slickdeals.net/f/13984520-wiha-22-piece-magicring-ball-end-hex-l-key-set-49-12

 

Yep it all depends on just how detailed you want to be I guess. If I remember correctly ( I haven’t been a controller since 1988) lighting for a civillian airfield is also a split white then green also. Neat project is it for eco planes or something or just something you wanted to build?

 

Just wanted to build it as it goes with my love for aviation; wanna help me come up with a stealth bomber design? Either B52 or F117 based on this:

 

Looks like a nice base shape there

 

yup its an old busted vector lightbar base

 

The truck is running so good right now its weird.

 

Can anyone provide some insight on if there is a fuse that has a 12V supply when the back up lights/ camera is on? I’m installing a switch pro and want to put a trigger in so my rear lights come on when in reverse.

I tried the “10A BKUP LP” fuse on the left side of the steering wheel fuse box, but my voltmeter isn’t reading anything, even in reserve and with the headlights on/off.

2012 TRD Sport

 

Tried to do some research on it but shits confusing... In VA, does the exhaust have to go past the rear axle?

 

Per 19VAC30-70-300: Muffler, Exhaust System and Trailer Venting, my understanding is it only has to extend past the cab. Below are the sections that follow “inspect for and reject if...”

 

A bunch of us just tapped into the rear lights themselves. Your backup light amperage is most likely low enough that you don't need a separate circuit

 

What are you thinking of doing?

 

If its enclosed it has to go all the way out or wont pass inspection. Thats why i rerouted mine because i have a cap. If the back is open i've heard its 2 feet past the cab.

 

Easiest way to tap into it? Through the taillights themselves?

 

I used the wire in the harness behind the tail light

 

Pinzgauer anyone?

https://baltimore.craigslist.org/ctd/d/forest-hill-1973-steyr-pinzgauer/7110059431.html

There was one in Amissville for sale some months ago for 13K not sure if thats the same one now.

 

https://jalopnik.com/you-need-to-hear-this-toyota-funk-song-somebody-found-o-1842936675

 

So beleve it or not I made it to the finals in the cooking challenge. They openned up a new poll for voting if anybody would care to it is here thank you

https://www.tacomaworld.com/threads...n-for-the-finals.660248/page-11#post-23188215