What Have You Done To Your 3rd Gen Today?

Good luck. The last thing I received from UPS was "delayed" because they damaged the box(has to re-package) and lost some parts inside.

 

Was thinking of doing the same but in blue or chrome. It's funny how some ideas just catch on like wildfire on this forum.

 

Thanks. This was already an Amazon Warehouse deal so the box was already damaged. Not sounding good.

 

Got the oil changed lol

 

I bet blue would look great. Every review I saw of the shiny or "electroplated" version complains that it faded within a few days.

 

Hey @Chief 4x4 - I got a chance to do a tire rotation add some wheel spacers and today, so I shot a couple quick videos of the QuickJack in action the video quality isn't great for some reason, but you should be able to get the idea. The first shows the QuickJack going up and locking back down into position. The second shows the QuickJack going up just a little to unlock and then coming back down.




I have the SUV adapters that help lift the truck higher than the stock rubber blocks. There are 2 height settings that you can lock in to. I only jacked the truck up to the lowest setting and it's just enough to get all 4 wheels off the floor with the SUV adapters, but just barely. It can go up another couple inches if needed. Below are a couple photos to show how high the wheels are from the floor.

Front

Rear


Edit: Fixed Video Quality

 

Photoshopped a pic of it

 

Hahahaha it's all for the clout. No testing here. Come on now

 

Getting ready to order one.... have they fix this problem or is this now part of the installation process fixing cheap bolts on a expensive mod .....

 

That's a nice anvil. Really nice.
Zim

 

Installed some of this today. Only had it since November. Still need to install amp.

 

Swapped the rear bumper caps today. Now I have some Toyota OEM White bumper caps with sensor holes available for anyone interested in buying them with shipping costs.

 

Been there, I just got a little too old to be doing all the things that I used to do by hand. Take your time, stay hydrated and you'll get it done before you know it. Wish you were close by I'd load that wheelbarrow for you.

 

Scary true story. Kingsland, Ga. Texaco Lube. Manger told oil change guy to get down in the pit, just like the picture above, and vacuum up some gas after a fuel filter changed. Blew the fellow into the rafters. He did not make it. That's a scary pic for me. Sorry.
Zim

 

That stinks!

 

Amazon finally updated the delivery window. The 19th through the 21st. Oh, well!

 

It's nice to know how much voltage you have if you are sitting in your vehicle listening to the radio etc and making sure you don't run the battery too low so yo can still start it.

 

Yeah, like oversized tires . . . and lifts.

 

Just some audio goodness

 

Better late than never.