What Have You Done To Your 3rd Gen Today?

Good! Better than my welding skills!

 

Rear hitch in a pinch

 

The only place really that I’ve found is the recovery points on an aftermarket bumper or this:



Not my photo but because the attachment levers off the tire it usually doesn’t hit the truck body. I’ve used this in recovery (sand) and it works really well

 

I have those as well. I love them and have not even considered aftermarket wheels.

 

Looks good! What wheels are those?

Also, isn't that the Ramstein base housing?

 

Toyota part

$60 PT857-35200 Toyota Genuine 2020 & Newer Tacoma Led Bed Light/Lighting Kit PT857-35200

PT857-35200, but this is for 2020 only. Earlier 3rd gens will use a different part number, and the wiring is a bit more complicated.

 

Hey, what do you mean by tubbing?

 

I’ve been there many, many times. The trick for me was to take a 30 minute nap at 9am then try to do a regular day after that. I would fall asleep at 9pm too. Everything was good after that.

 

When you have FabFours rear bumper
OR as a poor man's winch.
Have a nice evening.

 

Nice job. Looks like you planned it to be able to use the recessed area to put a 2”x6” in there if needed to carry things.

 

Thats......
Never mind.

 

Looks nice Bob. Great job.

 

I'd like to say that I did! That's right I remember now I did plan it just like you said. Soon as I mount my axe I need to go find a cherry tree!!

 

first impression on stock tires, very Nice ride. Night and day over stock. With E rated tires(set @40psi) a little stiffer but still very forgiving on potholes and such. I think the stock sport suspension and E rated tires would have sucked DD’s.

Going back and forth with these the 6112/‘s/dobs/eibach’s. And a couple others. For the $. For what I plan on doing with this truck. Think I made the right choice.

 

Really liking the improvements Jay! Congrats on making your truck look even better!

 

Thanks Cappy.

 

I removed some of the bumper for tire clearance...




For this....

 

What lift?

 

Could you Please post a picture of your infamous rivet tool we always hear about? Curious of where you picked it up, cost, and does it come with accessories, as in some different size threaded rivet rod and nuts? Or where do you purchase said items? Sounds like a tool that many of us would greatly benefit from.

 

Looks like all of the bumper!