What Have You Done To Your 2nd Gen Tacoma Today?

Full video incoming ?

 

@NavyDiver72 here are some pics of the filament once all cutting is done.



I’ll take some pictures of how much I cut off the mirror and where it bolts onto later. I have to pull off the door panel.

 

Gussying up a used OEM roof rack. Wiped the plastics down with Griot’s vinyl and rubber dressing to add some UV protection, sanded the roof bars with 600 grit and laid a few coats of flat black top and bottom.

And yes, I know they’ll just get scuffed again and I’m really anal retentive. You ought to see what it’s like to work with me.

 

They are the MESO Ultimate Map Lights in dual color

 

Washed all the dust off the truck.
And installed a FLOWMASTER 50 DELTA muffler.
Like the deep mild sound . Happy with that.

 

You know it. Had to pack up all the gear quickly when it started raining today.

 

I would agree with you but I dont really like the OEM look alike ones I really like the OTTAWA switches Gotta figure out how to make those fit.

 

I'd say I caught that in time. Also installed tooters spacer I had laying around

 

I started to replace the interior lights with LED's. These were leftover from a KIA I had as I didn't have the exact ones. Worked fine. Still need a couple more.

 

The other thing I did. Hurst t handle for my Hurst core shifter. Still playing with the placement, but that's been the most comfortable so far

And lighted 4x4 switches. I forgot about that. Used the kit on here, I'll tag the guy in a minute.

 

do you like your hurst? is it a big difference over stock?

 

That’s a beautiful truck, great pics

 

Niceeee!

Did you black out your TRD PRO TACOMA emblem?

 

I love the Hurst core shifter. Huge difference. The website claims a 40% reduction and it definitely feels like it

 

i've heard there can be issues with noise... have you had any?

 

None that turning up the radio can't fix...

I'm kidding. I thought the noise was due to lighter knobs.but don't quote me on that. I've run a heavy steel knob since I got it and just switched to the t handle, which is also heavy.

 

wash/clay/polish yesterday. Top coat today.

 

Installed 1” styrofoam insulation in my ARE DCU cap today. All done except for the top/side front and back corners since I’m waiting on that to mount and wire lights for the outside. Man what a pain in the ass this was. Not hard but because I’m ocd about this stuff it took longer than I thought. I have FRP shower board to install and I know that’s going to be fun...