What Have You Done To Your 2nd Gen Tacoma Today?

Well, after entirely to much time stuck at home and the tuck just turning 40k... I went right down the list. The only thing I think I still have left is to clean the throttle body/ MAF sensor.

• Rotate tires.
• Replace engine oil and oil filter.
• Lubricate propeller shaft
• Re-torque propeller shaft bolt.
• Cleaned Ball joints and dust covers
• Cleaned brake lines and hoses
• Cleaned drive shaft boots
• Replace engine coolant
• Radiator and condenser flush
• Cleaned fuel lines and connections, fuel tank band, and fuel tank vapor vent system hoses
• Replace fuel tank cap gasket
• Cleaned steering gear
• Cleaned steering linkage and boots
• Replace spark
• Transmission fluid flush and filter
• Front differential flush
• Rear differential flush
• Replace transfer case oil
• Power steering flush
• Brake fluid line flush
• Replace engine drive chain

 

+1. Had an Optima years ago (my first AGM) and it was awesome. Lasted forever. Got one to replace it (Yellow top in my 1st gen) and was warrantied several times. Sold the truck with it so don't know how long it will last but didn't like the failure rate.

Just got an Odyssey for my 2nd gen. I've had nothing but good luck with that brand in motorcycles, so hoping their big boy batteries are just as good.

 

???? What's this all about?

 

This quarantine got me so bored I've started removing every last bit of chrome possible. Found these black fasteners at home Depot. Black lug nuts on order!!

 

ECGS Bushing and 2" leveling kit up front. I feel at peace.

 

Just DM @ImMrYo and ask if he has any left.

 

3" lift. Tires are almost 34".

 

I painted the engine cover with plasti-dip, just to do something. I also used the Turtle Wax headlight restoration kit. I only used the compound instead of the sanding disk and polish like I had originally planned because I thought it did a pretty good job with just the compound. I also bought the Meguire’s PlastX, which I used on my wife’s Sienna, and it did a really good job too.



Headlight before compound:

Headlight after doing two passes with the compound

 

Try this on the headlights next time. I use it with a powercone on a cordless drill.

$10 Mothers 05101 Mag & Aluminum Polish - 10 oz

https://www.amazon.com/Mothers-05101-Mag-Aluminum-Polish/dp/B0009H519Y

 

Finished installing the "anytime front/rear camera" kit. Got the switch to the left of the A-Trac switch and currently have the front camera mounted way too low to be useful. Will figure that part out tomorrow though.

 

Cool, thanks. I would love to see the placement of the bolts.

 

Sweet. My wheel lock stripped out

 

What size tire is that?

 

These came in today

 

285/75/16

 

Ive got the EL96R did you add another leaf to that? If so what did you use? Im trying to get like anouther .5-.75 of lift back there.

 

I hate the OEM lock nuts!! I went with these and new black lugs!

$25 Gorilla Automotive 73631TBC Locking Lug Nuts & 1 Key for Toyota/Lexus Aluminum Wheels - Set of 4

https://www.amazon.com/dp/B00YJJ4N10?ref=ppx_pop_mob_ap_share

24 MAG Lug Nuts 12x1.5 Works with Toyota Factory Wheels(Black)

https://www.amazon.com/dp/B004GJBTEC/ref=cm_sw_r_apa_i_WnmOEbA7YK2HX

 

No I had the HD Dakar’s and removed the third leaf Plus the top overload. If you want a little lift just get a tiny ass block

 

Wait then how did you have 4 inches of lift in the rear at one time?