What Have You Done To Your 2nd Gen Tacoma Today?

Yeah I learned today these will rust, so back to chrome I guess. Maybe I'll try using black touch up paint or nail polish haha

 

Bolted right up

 

I put black nail polish on my license plate ones worked real well.

 

Well I just learned today these will rust, they're black oxide m3, m5, and m8x1.25 size. So back to chrome. I might try black touch up paint or nail polish haha

 

Ok cool, I'll try that!

 

Just took these.

 

try a good tire/wheel shop

 

they may prove me wrong and last a good while but unfortunately black phosphate is just about only good as an interior fastener. There is the off chance they are black zinc but I’d doubt it if they came from somewhere like Home Depot or Lowe’s.

 

Burn in hell chrome!
Figured I’d blackout the valance while I was at it.

 

After doing some research, I found that here in the States, aftermarket AC/heated seats are all selling for around $800+ for a set. So I checked out Alibaba and found what looked to be a quality set, selling for only $400. I decided to go for it. So far the quality looks pretty good but only time will tell. The seller was very professional and shipped fast (as fast as could be expected coming from China).

12V Universal Fits Vehicle Heated Seat Semiconductor Car Seat Heater And Cooler System
https://www.alibaba.com/product-det...a2756.order-detail-ta-bn-b.0.0.7a012fc2RLYh8n

Fresh off the boat (after 14 days in quarantine)

Here’s all the features... an impressive list

Took about a month to get here; It was packaged pretty well

Everything looks high quality

This looks like my Warranty Card... There's probably some important stuff there, written in red...

Inspector Number 12, don't let me down!!

LOL, This looks like something should be going this way and something else should go that way.

Ohhh, Thank God!!

Nice! Could put this anywhere

Okay, Back in the box for a rainy day

 

A while back my girlfriend lost the wheel lock socket to the wheel locks on her car.. we hammered sockets on them to be able to pull them out...

 

Crossed over into “Approaching 200K land” AKA. Just breakin’ in

and a little engine bay candy

 

I have those rotors and I've been running them for a couple years now with no issues. I don't tow, but haul gear up and down elevation along with weekend off roading. I replaced my originals due to "warped" rotors causing shaking under braking. Just make sure you break them in properly with the braking procedures.

 

They probably are. No rust after a year. I'd just prefer black hardware

 

Dang. They are way too small to powdercoat

 

I doubt it’ll prove you wrong. I have rust just from the humidity here on the black oxide screws holding my cell phone mount inside my cab.

 

Put it on the front of the roof rack, then you can get rid of that "feeler" cb antenna

 

I wish I had cooled seats in my Truck like my Wife's 4Runner. Please provide an update when it is installed.

 

Toyota dealers here in Atlanta keep a box of the keys in the parts dept. Take it to your dealer and match up the # and see what they say. Last one I needed they gave it to me free.

 

Will do. I just need to order the leather seat covers first.