What Have You Done To Your 2nd Gen Tacoma Today?

I used no trim, just painted the raw edge. I've seen trimmed flares too without any trim and personally I prefer that look. If you do a good job on the cut it's not needed.

 

Yeah, my cuts are fine. Pondering the trim -less route also. I’m putting my flares back on. If anything may put the trim on flares. Dunno.

 

this is as far as I’ve gotten atm.

 

Here's what a trimless flare looks like if you were curious.

https://www.tacomaworld.com/threads...t-w-o-body-lift.285871/page-333#post-13073362

 

I’m going to cut more off the fenders i think. I’ve got my fenders lined at 2 3/4.

 

That is a clean cut on the painted flare.

 

Have you made the cut yet? I only took 1.5" off my fenders and it's plenty of clearance. Really not that much needs to come off for 35s. It looks like you already cut plenty.

 

I may even need to cut more off my cab mount. I did a pretty aggressive cut on it the first time. So we’ll see!

 

Well I cut 2 1/4 off my flares, so that will work out good cutting the metal back 2 1/2

 

@EatSleepTacos did you ever regear ?

 

thanks, yours came out good too! i did self etching spray primer. and then the gunmetal

 

Probably the old coat hanger through the window gap trick

 

Wish they would’ve used a coat hanger on my truck

 

That sucks....

 

Repositioned the CB. Used a phone organizer I found at Wally's and went to town with the Dremel. I'll some of the real estate for patches

 

I installed a GTA Car Kit Bluetooth module on Sunday. Decided to put the mic in a central spot that didn’t have a fan blowing on it. Quick hole drilled and whala!

 

That blows man Im so sorry

 

This is a great idea. I was going to dish out $$$ for a pre-fab

 

https://www.amazon.com/gp/product/B01BWKCUAO/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

 

Trimming the rears today. Driver side is done, much easier vs the front