Fitting 35’s with minimal trimming NOW ADDING LONG TRAVEL AND 934 CV’s

What is the benefit of heimed lowers over normal bushings? I don't think heims would last long in my climate up here

 

Uniball lowers are more heavy duty designed for extreme beatings. The OE bushings are cool because they never get noisy and don’t care about mud one bit

 

OE is likely the better option for me. Mostly worried about salty winters.

 

Then OE is perfect for you

 

What about just the slide rack with no tie rods?

 

About $300 cheaper

 

Here in the salt belt of the North East exposed uniballs last about a year on UCA/LCA before the noise becomes unbearable. I suspect on a LCA pivot they will last a bit longer, due to lower deflection and orientation (less salt and road grit getting forced into the PFTE).

 

Those are some damned fine prices.

Is there a core charge on the axles?

 

Yes we need your stock inners to modify

 

What do you guys think about a group buy? If we do runs of 10+ the pricing can come down

 

For those wondering how the slider is sealed here is a pic of the setup

 

I'm interested to see this axle set up and how/where the slide is interfaced. A solid set of axles competitive with RCV would be awesome.

 

So this is what you’re selling, right? The slider that gets bolted/welded on but not the actual steering rack that it reinforces?

 

You use the factory rack, this setup bolts to it

 

Here is the completed rack assembly out of the truck. The bar across the bottom is the jig used to make it and is not part of the kit

 

If you are 2WD the Maxtrac spindles flip the tie rod to the top.

 

That is awesome! BEEEEEF! I’ve been nursing my ailing stock rack along, will need to snag one of these when I replace it finally.

 

Thank you for posting this pic. Ever since @81Trekker spoke of the slam that the KINGs provided, and a limit strap was the fix, I've been trying to figure how to attach to my new TC lowers.

I love this thread!

 

The tie rod is in the same location the spindle is just built differently... and this is a 4x4 only thread

 

Might want to change your mind on that....i'm about ready to drop $2300 bucks on your LCA mount and steering mods.....u can give me just a little reach around for that...no?