TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

Yes he should be able to do that no problem.

 

Awesome. Thank you.

I could find info that his computer would not properly operate my automatic transmission, but couldn’t get a straight answer on the engine.

Thank you

 

The heads are different. He'll need to use the later exhaust manifold gaskets and hope that his manifolds cover the air injection holes.

Non air inj:


With:

 

Ah, OK. I sent him the link to this thread so he can see the replys. Thank You.

 

yes, you can use older manifolds on the newer heads but you have to use the old style gasket. I went through this considering 05-11 long tubes on my 14. The older gaskets block off the SAI holes.

 

i think he could just use everything from yours. just needs some block off plates for the air injection ports. now that mine is off i assume any 05-15 motor would work in mine for example.

 

yesterday after my alignment was done i have the indicator light on with the car and tire squigles. (all are on because truck isnt running for photo).
what aside from the front wheel sensor could be my issue? the sensors appear to be connected well.
a neg battery disconnect did not fix it.

 

check this out

https://www.tacomaworld.com/threads...ibrate-your-vsc-computer-the-easy-way.467485/

 

thank you. wonder why the alignment a couple months ago didnt do this. same tech, same shop.

 

good call I have my CB wiring Running though that grommet.

 

Tim sold the headers so there is no exhaust manifold or headers that come with them.

 

good for the gasket facts! how many times can the factory ones be reused? i recall urd said to just reuse stock.

 

I used the orange permatex with the stock gasket to help seal.

 

Anyone using one of these sets? Off topic, but not really. Go fast fabrication parts.
SWAG OFFROAD DIY FINGER PRESS BRAKE

 

that sounds borderline kinky

 

Not that particular item but I have multiple other tools from them and they are awesome. I have the utmost confidence in what they sell.

 

is it like a linelock for launching?

 

The last time mine did this is was due to damage to the front wheel speed harness. It gets pretty stretched with a lift.

 

no, its for bending metal

 

I have a very very stupid question.

Is there any way to make our trucks 2 step? I know you're asking why. Well, noise. Thats why.