Northern Virginia Roll Call

Two fisting jack, then coke

 

Needs to measure the back of the cab... already have an 4X6 aluminum trailer that i can hack up if need be.

although the Norweld tray is dead sexy..... I want a cab sized bed. Meaning, no over sized stuff. not sure on how that would work on property taxes for a cut down trailer to a bed???

 

Awesome! Flat beds are usually a result of ambitious rear suspension projects. What’s your thought on shape and purpose?

 

I would say make the structure of the bed steel. That way you can weld it to the frame and it tie into a roll cage when that happens

 

Not on it.

 

Nice. I was drifting the work truck yesterday evening running out to/back from the test range at the end of the day.

Never had them in the crack luckily.

 

Tacoma.sideshow

 

DaMN... We gots activity!

Right on! Yo's

 

Hey now, we're on here everyday. You just popped outta nowhere.

 

I’m planning on tossing my 600# spring back on up front and dropping a couple 100 pounds off the lower springs on the rear to lower the truck a couple inches and get a sway bar for the rear and spend hours a day drifting! It’s too much fun!

 

I still need to get new springs to drop the front to something reasonable.

 

What are you running up front?

 

coolz.. to be different and carry what ever the hell I want ( not to be an ass.). suspension will vary as to what you will load in the bed.

I dig this tray like as champ. but want it to not over hang the cab (wider). https://www.mainlineoverland.com/products/norweld-basic-tray-short-bed-mid-size-trucks

ok., get what your saying. but basing my thoughts off of prior beds (Army shit). most are spring loaded at the front for twist and tied to the rear. that said. after years of seeing this, I thinking the same. but what do I know. haha

 

straight axle that mofo. then run linear or progressive springs.

 

I have one but it's not a portable type. If you're by your old house feel free to stop by and use it.

 

600# 16"

 

thems in the ass crack sucks badly. trust me. you would rather have anything else painful happen to ya.

 

I have some 650 16" springs if anyone needs them

 

600# 16” are plush on my double cab if I don’t want any kind of lift. If I had hydros up front I would run them all day. Are you thinking 500#’s? Or lighter?

 

Did those come off those Monroe sensatracs you took off?