Eibach pro lift kit

I was in the same boat bud and i ended up do the exact same! Congrats on your purchase!

 

Same here. Ordered mine from @HeadStrong Off-Road. An awesome company to deal with. Extremely knowledgeable. They were very patient with me as I explored numerous options. I can’t recommend them enough.

Waiting on my kit to arrive. Very excited to get it installed. My best friend owns and operates a very reputable garage with floor lift and alignment machine. He said we can install it some afternoon/evening. It will probably cost me a pizza and a six pack.

 

Nice! Can't beat that deal for sure. I'm hoping (fingers crossed) to get a local guy to help, @Timbo's Customs . I don't have the jacks nor some of the tools to do it myself but I know he does amazing work. I'll still have to get an alignment afterwards but hoping since I have lifetime alignments when I bought my tires, they'll throw it up there really quick. Again, fingers crossed.

 

I’m down for a lift install. Just message me

 

sorry, that’s a no

 

Bump. Thanks for the post. I just pulled the same trigger on the Eibach kit with the 3-leaf AAL. I did this after talking with Head Strong folks. Can you direct me to the other thread so I can gain more information? Thanks.

 

This one?

https://www.tacomaworld.com/threads/now-available-all-new-redesigned-hs-3-leaf-aal.658544/

 

Yessir! Thank you!

 

I think we all squeezed that same trigger front Headstrong with the kit and the HS 3AAL. Marie was very patient with me as I asked a dozen.....or perhaps more questions. . Y’all post your rigs with your new stuff installed. I won’t be home for another few months, depending how the Rona treats us over here in the sandbox. I look forward to imagining my ride quality from a spacer leveling kit to the Eibach and AAL in the meantime.

 

You stay safe over there. Are you going to wait for the 'work-a-round' for the .5 to 1 inch difference in back to front lift?

 

I’m not exactly sure I’m tracking what you’re saying? You referring to the 2” AAL from HS they are coming out with in the future?

 

Yeah...that's exactly it. I was going to set my front coils/shocks at the second notch because of the bumper and winch I have ordered as well. A one inch difference is a bit much....

 

I spoke with Ryan from Eibach and he says if the rear is lifted at all, go ahead and run the second clip and it would sit near level with added front weight. My front bumper is a slimline steel bumper from SOSconceptsoffroad.

 

Bump. That’s good news. Thanks for the help.

I’m stoked - today’s a good day. I know things aren’t supposed to make me happy but...it’s a Tacoma!

 

So I ordered from HS preassembled on the second clip and since it has a natural front rake, hoping the HS 3 AAL will make it level to clear my tire set up.

And thank you for your well wishes of safety. I’m doing my best.

 

I ordered mine preassembled on the first clip. I’m not running any weight and I’m trying to keep the ride a bit softer. Also, I’m not planning on running 285’s or bigger tires. I’m going to stick with 265-75-16’s on my Ray10s. From pictures of other setups on here, I think it will be a good combination. Beefier than stock, but mild enough for daily driving. The nice thing about the Eibach setup is, if I change my mind, I can always bump it up a notch.

I know blocks get a lot of hate on here, but I’ve never had an issue with them. So, after talking it over with Headstrong, I opted for a 1.5” rear block. I don’t ever tow or haul very heavy and I wanted to maintain as close to factory ride in the rear as possible. I was advised that this would be a good option & also cheaper for me. Again, if I don’t like it, I’ll swap it out for their 3 Leaf AAL.

If I remember correctly, the rear of my truck is currently 1 inch higher than the front. I’m hoping to get a 2” lift in the front. With the 1.5” blocks in the rear, that “should” give me about a half inch rake. We shall see.

 

Did you leave the over leaf in on the rear or take it out? Truck looks amazing!

 

Just ordered mine today from head strong off road. Took advantage of the $60.00 off promo.
Eibach pro lift coils done set at 1st position and the 1” block.
Also ordered 4runner TRD Pro rims in the gloss gunmetal from dealer where I work. Should match up with my MGM Sport. Pics next week after install.

 

I am feeling some peer pressure......"everyone is ordering, so should you" but trying to hold strong and not hit the submit order button

 

You can live vicariously through the rest of us, although that's not as much fun, lol.