1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

*SOLD* Fox 2.5 w/ Resi, New Springs, and Icon Billet UCA

Discussion in '3rd Gen Tacoma Parts Marketplace (2016-2023)' started by seelyartacus, Apr 30, 2020.

  1. Apr 30, 2020 at 10:20 AM
    #1
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    357
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU
    I have a front end setup I'm looking to unload after an upgrade. Coilovers are Fox Factory 2.5 w/ reservoirs, w/o adjusters. This set as Eibach springs installed currently (14in, 650lb) and will include original springs. New lower spherical mounts w/ new spacers were just installed. Icon Billet UCAs with w/ rod ends to adjust camber from the top. New rod ends and uniballs installed. I did run the new rod ends and uniballs briefly before taking everything out.

    I had an aluminum T3 bumper, winch, and dual battery setup under the hood and this ran great w/ the new springs.

    Prefer to sell local (San Diego or Newport) but will ship if buyer pays shipping and ins.

    $1800 obo

     
  2. Apr 30, 2020 at 12:16 PM
    #2
    AlHago

    AlHago Well-Known Member

    Joined:
    Jan 30, 2019
    Member:
    #281295
    Messages:
    315
    Gender:
    Male
    First Name:
    Alan
    Huntsville, AL
    Vehicle:
    12 DCLB MGM
    Stock as all get out.
    Are you willing to sell the fox shocks separate?
    Thanks
     
  3. Apr 30, 2020 at 12:24 PM
    #3
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    357
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU
    no, not breaking them up. buyer can do so on their own
     
  4. May 1, 2020 at 2:04 AM
    #4
    javieer10

    javieer10 Well-Known Member

    Joined:
    Mar 27, 2017
    Member:
    #214589
    Messages:
    127
    Gender:
    Male
    First Name:
    Javier
    El Paso, Tx
    Vehicle:
    2017 Inferno Tacoma TRD OR
    If you decide to split, interested in the UCAs
     
    seelyartacus[OP] likes this.
  5. May 6, 2020 at 10:40 AM
    #5
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    357
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU
    *bump

    btw... I'll get the 600lbs springs powdercoated whatever color the purchaser wants, if they want
     
  6. May 7, 2020 at 11:20 AM
    #6
    onequarteratatime

    onequarteratatime Well-Known Member

    Joined:
    Apr 2, 2019
    Member:
    #288829
    Messages:
    556
    Gender:
    Male
    Marietta, GA
    Vehicle:
    2019 Quicksand DCSB Tacoma TRD Off-Road
    Alu Cab Explorer Canopy, 3.1 RTT, and ShadowAwn, Fox 2.5 DSC's, SOS Bumpers, SCS Stealth 6 w/Cooper AT3 285/75/16, Goal Zero 200W Solar setup, Expedition Essentials Dash mount system, OME EL096 rear leaf springs
  7. May 7, 2020 at 11:23 AM
    #7
    anthony250f

    anthony250f Well-Known Member

    Joined:
    Feb 18, 2012
    Member:
    #73066
    Messages:
    16,780
    Gender:
    Male
    First Name:
    Anthony
    San Diego, CA
    Vehicle:
    2008 dcsb trd offroad 4wd
    I actually just installed some heim uppers yesterday!
     
  8. May 8, 2020 at 7:13 PM
    #8
    AtribeCalledTaco

    AtribeCalledTaco Active Member

    Joined:
    Mar 28, 2020
    Member:
    #323245
    Messages:
    38
    Gender:
    Male
    First Name:
    Daryl
    Vehicle:
    2018 Quicksand Tacoma TRD OR
    interested pm me
     
  9. May 9, 2020 at 12:01 PM
    #9
    Sandlyfe73

    Sandlyfe73 Well-Known Member

    Joined:
    Jun 21, 2017
    Member:
    #222060
    Messages:
    72
    Gender:
    Male
    First Name:
    Chris
    Vegas / Henderson
    Vehicle:
    2017 TRD SPT
    What a hookup.
     
  10. May 13, 2020 at 1:58 AM
    #10
    808Cementtaco

    808Cementtaco Well-Known Member

    Joined:
    Jun 9, 2018
    Member:
    #255961
    Messages:
    151
    Gender:
    Male
    First Name:
    Kea
    Vehicle:
    2018 trd sport dcsb cement 6sp M/T
    3in front spacer lift with 2in rear block, 17in Ballistic w/285/70r17s 25%tint in front and 15%rear Plastidipped all badges Removed trd stickers Etc.....
    I’m definitely interested. Can I get a pm
     
  11. May 16, 2020 at 11:49 AM
    #11
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    357
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU
  12. May 17, 2020 at 12:44 AM
    #12
    AramsTRD

    AramsTRD Well-Known Member

    Joined:
    Mar 25, 2017
    Member:
    #214326
    Messages:
    548
    Gender:
    Male
    First Name:
    Aram
    North Hollywood
    Vehicle:
    2017 Tacoma Silver Sky Off Road 4X4
    6k LED headlights Baja Design Squadron Sport R fog lights CaliRaised Ditch Brackets w/ Baja Designs Squadron Amber Baja Designs Squadron Pro flush mount on Rear Bumper Kings 2.5 with Resi’s Front and Rear Icon Tubular UCA’s with Delta’s OME Dakars Leaf Springs Timbren U-Bolts Flips kit with Timbren Bumpstops Demello Offraod Front Bumper Smittybilt Winch9500lbs W/ Synthetic Rope TRD PRO Skid Plate for the front Pelfrey Mid, Rear and Gas Tank Skids Pelfrey Rear Bumper with Wilco Tire Carrier Welded on SCS F5’s 16x8 -25mm Wheels BFG KO2's 285 75 16 Prinsu Cabrac AllPro Rock sliders Import Equipment Red & Dark Grey Light Decals
    Are the Foxes extended travel?
     
  13. May 17, 2020 at 9:31 AM
    #13
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    357
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU
    Yes
     
  14. May 19, 2020 at 5:17 PM
    #14
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    357
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU

Products Discussed in

To Top