Ontario BS Thread

those farm jacks are handy so it would pay to have at least one in the convoy, I do usually add mine in the bed when going since it can also be used as a winch. I'm thinking mainly to pull the truck sideways if needed. can also be used to lift the truck to add stuff under the wheel for recovery etc.

but for tire changes I carry a bottle jack. still a bit sketchy but not as bad as a hilift.

+1 for the chainsaw and logs. thats a good idea and I'll be carrying mine from now on anyways for firewood.

 

Yes! And if you don’t have a girlfriend or know any girls like @Norilsk have a buddy do the work while you keep your hands in your pocket.....

 

some people are only good at certain things

 

the spacers ended up being 2" wheel spacers.

 

Or you could just buy a 1st gen and not feel a modicum of regret or sadness while you absolutely mangle the fuck out of the firewall to fit anything larger than 33's

 

i have 1 1/4 if you want to try

 

rubbing on the lower edge of fender
I just want to understand the alignment factors

 

2" spacer look.

 

So you moved your wheel 2” out which is the equivalent to running a 12” tire. Assuming it’s rubbing on the outer fender closest to the doors?

cut and hack till it fits. Easy on the punch weld though. Can split that and get some leaks.

 

Sorry fender flares. I'm messing with then lca adjusters now trying to get max clearance.
I'll cut and hack after I get tires I guess.

 

You want to adjust the castor. Push the wheel forward as much as possible (don’t remember if that’s negative or postive)

 

1 inch shackle fir my rear bumper its massive

 

Is the pin the same size as a 3/4” shackle?

 

no the pin is 1 inch

 

gonna put it on the passenger side counter the taco lean

 

Wonder if it will fit a general shackle hole?

 

Aren't holes usually 3/4?

 

I was wrong a 1 in shackle has a 1 1/8 thread didn't fit but 7/8 does still big

 

Need black shackle with red pin to match the rest of the truck

 

thats

that's why they have rattle cans