What Have You Done To Your 3rd Gen Today?

That is beautiful. Looked it up and saw some pics. Would love to visit there. Didnt realize some of our troops trained there. That's cool.

 

Ended up putting another couple layers Of spray on the bolts. Probably 6ish total coats. The first couple bolts I put back on the wheel the paint chipped off the bolt head (I realized I was over tightening the bolts) The rest of the bolts I did not tighten them down so much and the paint did not chip. I just finger snugged them down and then put the slightest amount of extra pressure with the socket on a screw driver attachment..(just a tiny bit further than finger tight, tried to get an exact torque spec but couldn’t find my small torque wrench) I think it will be plenty tight how I did it, as they were not on very tight when I removed them... If I were to do it again maybe I would try a tougher paint, like undercoating on a couple of the bolts to see how that held up. Still Very happy with how this turned out though. Just had to re spray a couple of the bolts I messed up at the beginning. Good luck with yours.

 

Man, Thanks for the update. Looks freaking amazing!!!

 

Slapped on the Sport/Pro hood that I recently picked up . Pro decals should arrive this week to finish her up

 

Is that the small print or large?

 

Where did you buy this from?

 

Man I miss NB

 

Raptor style grille lights on and off. See @RyanDCLB for mounts and got the lights on eBay. Mounts are not a perfect fit. I had to do some Dremeling to get them to fit properly. Hot wire ran to the INJ fuse under the hood. They come on with the key as do my DRL's.

 

Brand new to Tacoma, so apologies for a newbie question - what brand wheel is that? Gorgeous!!

 

I found a great way to mount my Maxtrax and Gas

 

Stealth Custom Series! They’re the best. Model is Ray10. Love mine even years after purchase

 

Thanks, and no worries. They are SCS Ray 10 16x8. Found them in stock on Freeman Toyota website

 

Bought a '20 Cement, TRD Sport, 4x4, Tech pack. LOVE THIS THING. Currently looking at storage options - contractor here.
I'm sure it is around here somewhere - but ability to get rear seats to flip up and/or out of way (vs forward) for floor storage would be great.
Low profile, black toolbox options being considered. And then, of course, 2" lift/wheels/tires.... Choices, choices!!!

 

What size are you running?

 

17x8.5 Ray10s and the tires are 285/75/17

 

Looks good!! I need to get mine mounted up soon.

 

Thanks man! I really love this size, it’s basically a skinny 34”

 

Large

 

The Grille of the 2020 OR is grey, but the rest of the accents are satin black, so I painted mine to match.

 

Got to mount a bed extender AND bed stiffeners. ATH stiffeners, with the OEM bed extender. All I had to do was push the OEM tubes closer together, no cutting required. Then some 1/8" 2"x2" angle iron. A couple bolts and nuts later, works like a charm.